ADSM-L
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [ADSM-L] 1 GBit FC sufficient for tape library?

2013-02-12 05:38:37
Subject: Re: [ADSM-L] 1 GBit FC sufficient for tape library?
From: Stefan Folkerts <stefan.folkerts AT GMAIL DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Tue, 12 Feb 2013 11:36:45 +0100 
If it is LTO1 or LTO2 you would be OK, if it is LTO3 or higher you are
limiting your drivers with your HBA.


On Tue, Feb 12, 2013 at 10:39 AM, Michael Roesch
<michael.roesch AT gmail DOT com>wrote:

> Hi all,
>
> we have an old HP MSL 6030 with two drives that share one 1 GBit FC port.
> Would that be enough to use with TSM? I have a feeling that says "no" but I
> couldn't find any minimum FC requirements.
> Anyone having more info? Maybe even an IBM technote?
>
> Thanks
>
> Regards,
> Michael Roesch
>
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [ADSM-L] 1 GBit FC sufficient for tape library?, Michael Roesch
Next by Date:  Re: [ADSM-L] 1 GBit FC sufficient for tape library?, Michael Roesch
Previous by Thread:  [ADSM-L] 1 GBit FC sufficient for tape library?, Michael Roesch
Next by Thread:  Re: [ADSM-L] 1 GBit FC sufficient for tape library?, Michael Roesch
Indexes:  [Date] [Thread] [Top] [All Lists]