ADSM-L
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [ADSM-L] 1 GBit FC sufficient for tape library?

2013-02-12 06:36:35
Subject: Re: [ADSM-L] 1 GBit FC sufficient for tape library?
From: Michael Roesch <michael.roesch AT GMAIL DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Tue, 12 Feb 2013 12:34:02 +0100 
Hi Stefan,

the drives are LTO4 ones. So the HBA would be the bottleneck


On Tue, Feb 12, 2013 at 11:36 AM, Stefan Folkerts <stefan.folkerts AT gmail DOT 
com
> wrote:

> If it is LTO1 or LTO2 you would be OK, if it is LTO3 or higher you are
> limiting your drivers with your HBA.
>
>
> On Tue, Feb 12, 2013 at 10:39 AM, Michael Roesch
> <michael.roesch AT gmail DOT com>wrote:
>
> > Hi all,
> >
> > we have an old HP MSL 6030 with two drives that share one 1 GBit FC port.
> > Would that be enough to use with TSM? I have a feeling that says "no"
> but I
> > couldn't find any minimum FC requirements.
> > Anyone having more info? Maybe even an IBM technote?
> >
> > Thanks
> >
> > Regards,
> > Michael Roesch
> >
>
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [ADSM-L] 1 GBit FC sufficient for tape library?, Stefan Folkerts
Next by Date:  Re: [ADSM-L] 1 GBit FC sufficient for tape library?, Stefan Folkerts
Previous by Thread:  Re: [ADSM-L] 1 GBit FC sufficient for tape library?, Stefan Folkerts
Next by Thread:  Re: [ADSM-L] 1 GBit FC sufficient for tape library?, Stefan Folkerts
Indexes:  [Date] [Thread] [Top] [All Lists]