checkout libv ltolib2 100562 checklabel=no remove=bulk
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Timothy Hughes
Sent: Thursday, September 04, 2008 7:37 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Incorrect volume being mounted for reclamation
Thanks Howard and Kelly!.
Before I try the Audit Library is there any other option that I could try?
Are there any command (s) to specifically check the label of volume
100562 and if it is incorrect then correct that tape with a command?
Thanks again I appreciate your responses!
Tim
Howard Coles wrote:
>Thanks Kelly,
>Not sure about anyone else's Outlook client but mine thoroughly hosed
>up those three commands to look like:
>
> "audit library libname checklabel=barcode checkin libvol libname
> search=yes checklabel=barcode status=scratch checkin libvol libname
> search=yes checklabel=barcode status=private"
>
>So here they are spread out:
>
>audit library libname checklabel=barcode
>
>checkin libvol libname search=yes checklabel=barcode status=scratch
>
>checkin libvol libname search=yes checklabel=barcode status=private
>
>See Ya'
>Howard
>
>
>
>
>>-----Original Message-----
>>From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
>>Of Kelly Lipp
>>Sent: Wednesday, September 03, 2008 4:00 PM
>>To: ADSM-L AT VM.MARIST DOT EDU
>>Subject: Re: [ADSM-L] Incorrect volume being mounted for reclamation
>>
>>Howard is right on. I'd add a couple more commands to his audit to
>>"synchronize" the library completely:
>>
>>Tsm> audit library libname checklabel=barcode checkin libvol libname
>>Tsm> search=yes checklabel=barcode
>>status=scratch
>>Tsm> checkin libvol libname search=yes checklabel=barcode
>>status=private
>>
>>These three command will ensure that your library inventory is
>>
>>
>accurate
>
>
>>and that all tapes in the library are checked in properly. The audit
>>library command will check tapes out that are not found. For
>>
>>
>instance,
>
>
>>if TSM thinks that tape 100087 is in the library, but the audit
>>determines that it isn't, it will be removed from the TSM library
>>inventory. However, if the audit finds tape 100088 that TSM doesn't
>>think is in the library, it won't automatically check it in. The two
>>checkin libvol commands fix that up as well. Note the order: you want
>>to do the scratch tapes first.
>>
>>Thanks,
>>
>>Kelly Lipp
>>CTO
>>STORServer, Inc.
>>485-B Elkton Drive
>>Colorado Springs, CO 80907
>>719-266-8777
>>www.storserver.com
>>
>>
>>-----Original Message-----
>>From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
>>Of Howard Coles
>>Sent: Wednesday, September 03, 2008 2:54 PM
>>To: ADSM-L AT VM.MARIST DOT EDU
>>Subject: Re: [ADSM-L] Incorrect volume being mounted for reclaimation
>>
>>Stop all processes, unmount all tapes and audit the library.
>>
>>It looks like TSM thinks tape 100562 is in the slot currently occupied
>>by 100617 instead.
>>
>>Either the paths are wrong for the drives, (which I doubt) or the
>>library's inventory is a little off.
>>
>>To verify, do a q libv, determine which slot TSM "thinks" the tape is
>>in, and then open up your library and see if they match. You may have
>>to actually take the tape out, and then back in again.
>>
>>I would try the audit first, then check TSM's list-o-tapes. IF the
>>tape your needing doesn't show up there may be other problems. Such
>>as
>>
>>
>tape
>
>
>>stuck in picker, not in library at all (mistakenly sent offsite), etc.
>>
>>See Ya'
>>Howard
>>
>>
>>
>>
>>>-----Original Message-----
>>>From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
>>>
>>>
>Behalf
>
>
>>>Of Timothy Hughes
>>>Sent: Wednesday, September 03, 2008 3:48 PM
>>>To: ADSM-L AT VM.MARIST DOT EDU
>>>Subject: [ADSM-L] Incorrect volume being mounted for reclaimation
>>>
>>>Hello all,
>>>
>>>I'm reaching at for any help on this.
>>>
>>><>We have a tape that needs to be reclaimed but it keeps being set
>>>
>>>
>to
>
>
>>>"unavailable" during reclamation.
>>>
>>>
>>>When I update the tape by doing the following using the GUI
>>>
>>>ANR2017I Administrator xxxxx issued command: UPDATE
>>>
>>> VOLUME 100562 ACCESS=READWRITE
>>>WHERESTGPOOL=LTOPOOL
>>>
>>> WHEREDEVCLASS=LTOCLASS (SESSION: 138535)
>>>
>>><>
>>>
>>> It changes back to available, however as soon as reclamation calls
>>>
>>>
>>for
>>
>>
>>>the tape it changes back to "unavailable" The TSM Server log with
>>>messages are below can anyone give me suggestions/help on the best
>>>
>>>
>>way
>>
>>
>>>to correct the issue?
>>>
>>>Thanks for any help in advance!
>>>
>>>
>>>ANR2017I Administrator xxxxx issued command: UPDATE
>>>
>>> VOLUME 100562 ACCESS=READWRITE
>>>WHERESTGPOOL=LTOPOOL
>>>
>>> WHEREDEVCLASS=LTOCLASS (SESSION: 138535)
>>>
>>>09/03/08 07:37:40 ANR2207I Volume 100562 updated. (SESSION:
>>>
>>>
>>138535)
>>
>>
>>>09/03/08 09:00:00 ANR1044I Removable volume 100562 is required
>>>
>>>
>>for
>>
>>
>>>space
>>>
>>> reclamation. (PROCESS: 946)
>>>
>>>09/03/08 09:00:36 ANR8356E Incorrect volume 100617 was mounted
>>>instead of
>>>
>>> volume 100562 in library LTO_LIB. (PROCESS:
>>>
>>>
>>947)
>>
>>
>>>09/03/08 09:01:01 ANR8381E LTO volume 100562 could not be
>>>
>>>
>mounted
>
>
>>>in drive
>>>
>>> RMT3 (/dev/rmt3). (PROCESS: 947)
>>>
>>>09/03/08 09:01:01 ANR1402W Mount request denied for volume
>>>
>>>
>100562
>
>
>>-
>>
>>
>>>volume
>>>
>>> unavailable. (PROCESS: 947)
>>>
>>>09/03/08 09:01:01 ANR1410W Access mode for volume 100562 now set
>>>
>>>
>>to
>>
>>
>>> "unavailable". (PROCESS: 947)
>>>
>>>09/03/08 09:25:50 ANR1420W Read access denied for volume 100562
>>>
>>>
>-
>
>
>>>volume
>>>
>>> access mode = "unavailable". (PROCESS: 946)
>>>
>>><> 09/03/08 13:00:38 ANR2017I Administrator XXXXX issued
>>>command: UPDATE
>>>
>>> VOLUME 100562 ACCESS=READWRITE
>>>WHERESTGPOOL=LTOPOOL
>>>
>>> WHEREDEVCLASS=LTOCLASS (SESSION: 143639)
>>>
>>>09/03/08 13:00:38 ANR2207I Volume 100562 updated. (SESSION:
>>>
>>>
>>143639)
>>
>>
>>>09/03/08 13:42:54 ANR1044I Removable volume 100562 is required
>>>
>>>
>>for
>>
>>
>>>space
>>>
>>> reclamation. (PROCESS: 961)
>>>
>>>09/03/08 14:08:30 ANR8356E Incorrect volume 100617 was mounted
>>>instead of
>>>
>>> volume 100562 in library LTO_LIB. (PROCESS:
>>>
>>>
>>961)
>>
>>
>>>09/03/08 14:08:55 ANR8381E LTO volume 100562 could not be
>>>
>>>
>mounted
>
>
>>>in drive
>>>
>>> RMT4 (/dev/rmt10). (PROCESS: 961)
>>>
>>> reclamation. (PROCESS: 965)
>>>
>>>09/03/08 14:10:12 ANR1420W Read access denied for volume 100617
>>>
>>>
>-
>
>
>>>volume
>>>
>>> access mode = "unavailable". (PROCESS: 965)
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>09/03/08 13:42:54 ANR1044I Removable volume 100617 is required
>>>
>>>
>>for
>>
>>
>>>space
>>>
>>> reclamation. (PROCESS: 962)
>>>
>>>09/03/08 13:42:54 ANR8312E Volume 100617 could not be located in
>>>library
>>>
>>> LTO_LIB. (PROCESS: 962)
>>>
>>>09/03/08 13:42:54 ANR8381E LTO volume 100617 could not be
>>>
>>>
>mounted
>
>
>>>in drive
>>>
>>> RMT5 (/dev/rmt4). (PROCESS: 962)
>>>
>>>09/03/08 13:42:59 ANR1402W Mount request denied for volume
>>>
>>>
>100617
>
>
>>-
>>
>>
>>>volume
>>>
>>> unavailable. (PROCESS: 962)
>>>
>>>09/03/08 13:42:59 ANR1410W Access mode for volume 100617 now set
>>>
>>>
>>to
>>
>>
>>> "unavailable". (PROCESS: 962)
>>>
>
>
>
This electronic transmission and any documents accompanying this electronic
transmission contain confidential information belonging to the sender. This
information may be legally privileged. The information is intended only for
the use of the individual or entity named above. If you are not the intended
recipient, you are hereby notified that any disclosure, copying, distribution,
or the taking of any action in reliance on or regarding the contents of this
electronically transmitted information is strictly prohibited.
|
