Stop all processes, unmount all tapes and audit the library.
It looks like TSM thinks tape 100562 is in the slot currently occupied
by 100617 instead.
Either the paths are wrong for the drives, (which I doubt) or the
library's inventory is a little off.
To verify, do a q libv, determine which slot TSM "thinks" the tape is
in, and then open up your library and see if they match. You may have
to actually take the tape out, and then back in again.
I would try the audit first, then check TSM's list-o-tapes. IF the tape
your needing doesn't show up there may be other problems. Such as tape
stuck in picker, not in library at all (mistakenly sent offsite), etc.
See Ya'
Howard
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
Of Timothy Hughes
Sent: Wednesday, September 03, 2008 3:48 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] Incorrect volume being mounted for reclaimation
Hello all,
I'm reaching at for any help on this.
<>We have a tape that needs to be reclaimed but it keeps being set to
"unavailable" during reclamation.
When I update the tape by doing the following using the GUI
ANR2017I Administrator xxxxx issued command: UPDATE
VOLUME 100562 ACCESS=READWRITE
WHERESTGPOOL=LTOPOOL
WHEREDEVCLASS=LTOCLASS (SESSION: 138535)
<>
It changes back to available, however as soon as reclamation calls
for
the tape it changes back to "unavailable" The TSM Server log with
messages are below can anyone give me suggestions/help on the best way
to correct the issue?
Thanks for any help in advance!
ANR2017I Administrator xxxxx issued command: UPDATE
VOLUME 100562 ACCESS=READWRITE
WHERESTGPOOL=LTOPOOL
WHEREDEVCLASS=LTOCLASS (SESSION: 138535)
09/03/08 07:37:40 ANR2207I Volume 100562 updated. (SESSION:
138535)
09/03/08 09:00:00 ANR1044I Removable volume 100562 is required for
space
reclamation. (PROCESS: 946)
09/03/08 09:00:36 ANR8356E Incorrect volume 100617 was mounted
instead of
volume 100562 in library LTO_LIB. (PROCESS:
947)
09/03/08 09:01:01 ANR8381E LTO volume 100562 could not be mounted
in drive
RMT3 (/dev/rmt3). (PROCESS: 947)
09/03/08 09:01:01 ANR1402W Mount request denied for volume 100562
-
volume
unavailable. (PROCESS: 947)
09/03/08 09:01:01 ANR1410W Access mode for volume 100562 now set
to
"unavailable". (PROCESS: 947)
09/03/08 09:25:50 ANR1420W Read access denied for volume 100562 -
volume
access mode = "unavailable". (PROCESS: 946)
<> 09/03/08 13:00:38 ANR2017I Administrator XXXXX issued
command: UPDATE
VOLUME 100562 ACCESS=READWRITE
WHERESTGPOOL=LTOPOOL
WHEREDEVCLASS=LTOCLASS (SESSION: 143639)
09/03/08 13:00:38 ANR2207I Volume 100562 updated. (SESSION:
143639)
09/03/08 13:42:54 ANR1044I Removable volume 100562 is required for
space
reclamation. (PROCESS: 961)
09/03/08 14:08:30 ANR8356E Incorrect volume 100617 was mounted
instead of
volume 100562 in library LTO_LIB. (PROCESS:
961)
09/03/08 14:08:55 ANR8381E LTO volume 100562 could not be mounted
in drive
RMT4 (/dev/rmt10). (PROCESS: 961)
reclamation. (PROCESS: 965)
09/03/08 14:10:12 ANR1420W Read access denied for volume 100617 -
volume
access mode = "unavailable". (PROCESS: 965)
09/03/08 13:42:54 ANR1044I Removable volume 100617 is required for
space
reclamation. (PROCESS: 962)
09/03/08 13:42:54 ANR8312E Volume 100617 could not be located in
library
LTO_LIB. (PROCESS: 962)
09/03/08 13:42:54 ANR8381E LTO volume 100617 could not be mounted
in drive
RMT5 (/dev/rmt4). (PROCESS: 962)
09/03/08 13:42:59 ANR1402W Mount request denied for volume 100617
-
volume
unavailable. (PROCESS: 962)
09/03/08 13:42:59 ANR1410W Access mode for volume 100617 now set
to
"unavailable". (PROCESS: 962)