Thanks Kelly,
Not sure about anyone else's Outlook client but mine thoroughly hosed up
those three commands to look like:
"audit library libname checklabel=barcode checkin libvol libname
search=yes checklabel=barcode status=scratch checkin libvol libname
search=yes checklabel=barcode status=private"
So here they are spread out:
audit library libname checklabel=barcode
checkin libvol libname search=yes checklabel=barcode status=scratch
checkin libvol libname search=yes checklabel=barcode status=private
See Ya'
Howard
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of Kelly Lipp
> Sent: Wednesday, September 03, 2008 4:00 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] Incorrect volume being mounted for reclamation
>
> Howard is right on. I'd add a couple more commands to his audit to
> "synchronize" the library completely:
>
> Tsm> audit library libname checklabel=barcode
> Tsm> checkin libvol libname search=yes checklabel=barcode
> status=scratch
> Tsm> checkin libvol libname search=yes checklabel=barcode
> status=private
>
> These three command will ensure that your library inventory is
accurate
> and that all tapes in the library are checked in properly. The audit
> library command will check tapes out that are not found. For
instance,
> if TSM thinks that tape 100087 is in the library, but the audit
> determines that it isn't, it will be removed from the TSM library
> inventory. However, if the audit finds tape 100088 that TSM doesn't
> think is in the library, it won't automatically check it in. The two
> checkin libvol commands fix that up as well. Note the order: you want
> to do the scratch tapes first.
>
> Thanks,
>
> Kelly Lipp
> CTO
> STORServer, Inc.
> 485-B Elkton Drive
> Colorado Springs, CO 80907
> 719-266-8777
> www.storserver.com
>
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of
> Howard Coles
> Sent: Wednesday, September 03, 2008 2:54 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] Incorrect volume being mounted for reclaimation
>
> Stop all processes, unmount all tapes and audit the library.
>
> It looks like TSM thinks tape 100562 is in the slot currently occupied
> by 100617 instead.
>
> Either the paths are wrong for the drives, (which I doubt) or the
> library's inventory is a little off.
>
> To verify, do a q libv, determine which slot TSM "thinks" the tape is
> in, and then open up your library and see if they match. You may have
> to actually take the tape out, and then back in again.
>
> I would try the audit first, then check TSM's list-o-tapes. IF the
> tape
> your needing doesn't show up there may be other problems. Such as
tape
> stuck in picker, not in library at all (mistakenly sent offsite), etc.
>
> See Ya'
> Howard
>
>
> > -----Original Message-----
> > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
Behalf
> > Of Timothy Hughes
> > Sent: Wednesday, September 03, 2008 3:48 PM
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: [ADSM-L] Incorrect volume being mounted for reclaimation
> >
> > Hello all,
> >
> > I'm reaching at for any help on this.
> >
> > <>We have a tape that needs to be reclaimed but it keeps being set
to
> > "unavailable" during reclamation.
> >
> >
> > When I update the tape by doing the following using the GUI
> >
> > ANR2017I Administrator xxxxx issued command: UPDATE
> >
> > VOLUME 100562 ACCESS=READWRITE
> > WHERESTGPOOL=LTOPOOL
> >
> > WHEREDEVCLASS=LTOCLASS (SESSION: 138535)
> >
> > <>
> >
> > It changes back to available, however as soon as reclamation calls
> for
> > the tape it changes back to "unavailable" The TSM Server log with
> > messages are below can anyone give me suggestions/help on the best
> way
> > to correct the issue?
> >
> > Thanks for any help in advance!
> >
> >
> > ANR2017I Administrator xxxxx issued command: UPDATE
> >
> > VOLUME 100562 ACCESS=READWRITE
> > WHERESTGPOOL=LTOPOOL
> >
> > WHEREDEVCLASS=LTOCLASS (SESSION: 138535)
> >
> > 09/03/08 07:37:40 ANR2207I Volume 100562 updated. (SESSION:
> 138535)
> >
> > 09/03/08 09:00:00 ANR1044I Removable volume 100562 is required
> for
> > space
> >
> > reclamation. (PROCESS: 946)
> >
> > 09/03/08 09:00:36 ANR8356E Incorrect volume 100617 was mounted
> > instead of
> >
> > volume 100562 in library LTO_LIB. (PROCESS:
> 947)
> >
> > 09/03/08 09:01:01 ANR8381E LTO volume 100562 could not be
mounted
> > in drive
> >
> > RMT3 (/dev/rmt3). (PROCESS: 947)
> >
> > 09/03/08 09:01:01 ANR1402W Mount request denied for volume
100562
> -
> > volume
> >
> > unavailable. (PROCESS: 947)
> >
> > 09/03/08 09:01:01 ANR1410W Access mode for volume 100562 now set
> to
> >
> > "unavailable". (PROCESS: 947)
> >
> > 09/03/08 09:25:50 ANR1420W Read access denied for volume 100562
-
> > volume
> >
> > access mode = "unavailable". (PROCESS: 946)
> >
> > <> 09/03/08 13:00:38 ANR2017I Administrator XXXXX issued
> > command: UPDATE
> >
> > VOLUME 100562 ACCESS=READWRITE
> > WHERESTGPOOL=LTOPOOL
> >
> > WHEREDEVCLASS=LTOCLASS (SESSION: 143639)
> >
> > 09/03/08 13:00:38 ANR2207I Volume 100562 updated. (SESSION:
> 143639)
> >
> > 09/03/08 13:42:54 ANR1044I Removable volume 100562 is required
> for
> > space
> >
> > reclamation. (PROCESS: 961)
> >
> > 09/03/08 14:08:30 ANR8356E Incorrect volume 100617 was mounted
> > instead of
> >
> > volume 100562 in library LTO_LIB. (PROCESS:
> 961)
> >
> > 09/03/08 14:08:55 ANR8381E LTO volume 100562 could not be
mounted
> > in drive
> >
> > RMT4 (/dev/rmt10). (PROCESS: 961)
> >
> > reclamation. (PROCESS: 965)
> >
> > 09/03/08 14:10:12 ANR1420W Read access denied for volume 100617
-
> > volume
> >
> > access mode = "unavailable". (PROCESS: 965)
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > 09/03/08 13:42:54 ANR1044I Removable volume 100617 is required
> for
> > space
> >
> > reclamation. (PROCESS: 962)
> >
> > 09/03/08 13:42:54 ANR8312E Volume 100617 could not be located in
> > library
> >
> > LTO_LIB. (PROCESS: 962)
> >
> > 09/03/08 13:42:54 ANR8381E LTO volume 100617 could not be
mounted
> > in drive
> >
> > RMT5 (/dev/rmt4). (PROCESS: 962)
> >
> > 09/03/08 13:42:59 ANR1402W Mount request denied for volume
100617
> -
> > volume
> >
> > unavailable. (PROCESS: 962)
> >
> > 09/03/08 13:42:59 ANR1410W Access mode for volume 100617 now set
> to
> >
> > "unavailable". (PROCESS: 962)
|