Re: [ADSM-L] Incorrect volume being mounted for reclamation
2008-09-04 10:11:49
Thanks Bob for your response!
Tim
Bob Levad (641-585-6770) wrote:
checkout libv ltolib2 100562 checklabel=no remove=bulk
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Timothy Hughes
Sent: Thursday, September 04, 2008 7:37 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Incorrect volume being mounted for reclamation
Thanks Howard and Kelly!.
Before I try the Audit Library is there any other option that I could try?
Are there any command (s) to specifically check the label of volume
100562 and if it is incorrect then correct that tape with a command?
Thanks again I appreciate your responses!
Tim
Howard Coles wrote:
Thanks Kelly,
Not sure about anyone else's Outlook client but mine thoroughly hosed
up those three commands to look like:
"audit library libname checklabel=barcode checkin libvol libname
search=yes checklabel=barcode status=scratch checkin libvol libname
search=yes checklabel=barcode status=private"
So here they are spread out:
audit library libname checklabel=barcode
checkin libvol libname search=yes checklabel=barcode status=scratch
checkin libvol libname search=yes checklabel=barcode status=private
See Ya'
Howard
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
Of Kelly Lipp
Sent: Wednesday, September 03, 2008 4:00 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Incorrect volume being mounted for reclamation
Howard is right on. I'd add a couple more commands to his audit to
"synchronize" the library completely:
Tsm> audit library libname checklabel=barcode checkin libvol libname
Tsm> search=yes checklabel=barcode
status=scratch
Tsm> checkin libvol libname search=yes checklabel=barcode
status=private
These three command will ensure that your library inventory is
accurate
and that all tapes in the library are checked in properly. The audit
library command will check tapes out that are not found. For
instance,
if TSM thinks that tape 100087 is in the library, but the audit
determines that it isn't, it will be removed from the TSM library
inventory. However, if the audit finds tape 100088 that TSM doesn't
think is in the library, it won't automatically check it in. The two
checkin libvol commands fix that up as well. Note the order: you want
to do the scratch tapes first.
Thanks,
Kelly Lipp
CTO
STORServer, Inc.
485-B Elkton Drive
Colorado Springs, CO 80907
719-266-8777
www.storserver.com
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
Of Howard Coles
Sent: Wednesday, September 03, 2008 2:54 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Incorrect volume being mounted for reclaimation
Stop all processes, unmount all tapes and audit the library.
It looks like TSM thinks tape 100562 is in the slot currently occupied
by 100617 instead.
Either the paths are wrong for the drives, (which I doubt) or the
library's inventory is a little off.
To verify, do a q libv, determine which slot TSM "thinks" the tape is
in, and then open up your library and see if they match. You may have
to actually take the tape out, and then back in again.
I would try the audit first, then check TSM's list-o-tapes. IF the
tape your needing doesn't show up there may be other problems. Such
as
tape
stuck in picker, not in library at all (mistakenly sent offsite), etc.
See Ya'
Howard
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
Behalf
Of Timothy Hughes
Sent: Wednesday, September 03, 2008 3:48 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] Incorrect volume being mounted for reclaimation
Hello all,
I'm reaching at for any help on this.
<>We have a tape that needs to be reclaimed but it keeps being set
to
"unavailable" during reclamation.
When I update the tape by doing the following using the GUI
ANR2017I Administrator xxxxx issued command: UPDATE
VOLUME 100562 ACCESS=READWRITE
WHERESTGPOOL=LTOPOOL
WHEREDEVCLASS=LTOCLASS (SESSION: 138535)
<>
It changes back to available, however as soon as reclamation calls
for
the tape it changes back to "unavailable" The TSM Server log with
messages are below can anyone give me suggestions/help on the best
way
to correct the issue?
Thanks for any help in advance!
ANR2017I Administrator xxxxx issued command: UPDATE
VOLUME 100562 ACCESS=READWRITE
WHERESTGPOOL=LTOPOOL
WHEREDEVCLASS=LTOCLASS (SESSION: 138535)
09/03/08 07:37:40 ANR2207I Volume 100562 updated. (SESSION:
138535)
09/03/08 09:00:00 ANR1044I Removable volume 100562 is required
for
space
reclamation. (PROCESS: 946)
09/03/08 09:00:36 ANR8356E Incorrect volume 100617 was mounted
instead of
volume 100562 in library LTO_LIB. (PROCESS:
947)
09/03/08 09:01:01 ANR8381E LTO volume 100562 could not be
mounted
in drive
RMT3 (/dev/rmt3). (PROCESS: 947)
09/03/08 09:01:01 ANR1402W Mount request denied for volume
100562
-
volume
unavailable. (PROCESS: 947)
09/03/08 09:01:01 ANR1410W Access mode for volume 100562 now set
to
"unavailable". (PROCESS: 947)
09/03/08 09:25:50 ANR1420W Read access denied for volume 100562
-
volume
access mode = "unavailable". (PROCESS: 946)
<> 09/03/08 13:00:38 ANR2017I Administrator XXXXX issued
command: UPDATE
VOLUME 100562 ACCESS=READWRITE
WHERESTGPOOL=LTOPOOL
WHEREDEVCLASS=LTOCLASS (SESSION: 143639)
09/03/08 13:00:38 ANR2207I Volume 100562 updated. (SESSION:
143639)
09/03/08 13:42:54 ANR1044I Removable volume 100562 is required
for
space
reclamation. (PROCESS: 961)
09/03/08 14:08:30 ANR8356E Incorrect volume 100617 was mounted
instead of
volume 100562 in library LTO_LIB. (PROCESS:
961)
09/03/08 14:08:55 ANR8381E LTO volume 100562 could not be
mounted
in drive
RMT4 (/dev/rmt10). (PROCESS: 961)
reclamation. (PROCESS: 965)
09/03/08 14:10:12 ANR1420W Read access denied for volume 100617
-
volume
access mode = "unavailable". (PROCESS: 965)
09/03/08 13:42:54 ANR1044I Removable volume 100617 is required
for
space
reclamation. (PROCESS: 962)
09/03/08 13:42:54 ANR8312E Volume 100617 could not be located in
library
LTO_LIB. (PROCESS: 962)
09/03/08 13:42:54 ANR8381E LTO volume 100617 could not be
mounted
in drive
RMT5 (/dev/rmt4). (PROCESS: 962)
09/03/08 13:42:59 ANR1402W Mount request denied for volume
100617
-
volume
unavailable. (PROCESS: 962)
09/03/08 13:42:59 ANR1410W Access mode for volume 100617 now set
to
"unavailable". (PROCESS: 962)
This electronic transmission and any documents accompanying this electronic
transmission contain confidential information belonging to the sender. This
information may be legally privileged. The information is intended only for
the use of the individual or entity named above. If you are not the intended
recipient, you are hereby notified that any disclosure, copying, distribution,
or the taking of any action in reliance on or regarding the contents of this
electronically transmitted information is strictly prohibited.
|
|
|