William..
Thanks for your response, sounds like I'm having a similar problem to
what you experienced. The reclamation job isn't cross device classes
though. I guess the other LTO3 drive was in use by an LTO2 process which
could be confusing it.
Regards
Chris
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
William Boyer
Sent: Thursday, May 11, 2006 2:18 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] waiting for mount point ??
I had a problem about a year ago when I installed a single LTO3 drive in
my 3583 with 3 other LTO1 drives. I created a new devclass
and specified FORMAT=ULTRIUM3C and the original devclass for the LTO1
drive I changed to FORMAT=ULTRIUMC. Everything worked just
find until I had to try to copy from LTO1 media to LTO3 media. The
processes would just sit in a waiting for mountpoint and never
complete.
I ended up opening a PMR with IBMTivoli and the response was that the
drive allocation module would need to be re-written to handle
this going between devclasses with mixed drives in a single library. IBM
closed the PMR as a doc change. They changed the doc to say
that FULL support of mixed media/drive libraries will only happen if
you logically partition the library to separate the device
types.
I was searching the archives for my post last year, but can't find it
right now.
Bill Boyer
"Some days you're the bug, some days you're the windshield" - ??
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Rees, Chris (E.ON IS UK)
Sent: Thursday, May 11, 2006 8:51 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: waiting for mount point ??
Hi David
As I put in my post, I've checked that the paths are correct and online.
Both drive34 and drive 35 have been used today by other processes.
I've checked they are definitely empty with the 3584 web interface.
There are no entries in the AIX errpt for them.
Regards
Chris
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
David E Ehresman
Sent: Thursday, May 11, 2006 1:40 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] waiting for mount point ??
Did you verify that the PATHs are online?
>>> Chris.Rees AT EON-UK DOT COM 5/11/2006 8:28:33 AM >>>
All
I'm a little confused by what I'm seeing here and I'm hoping someone can
shed some light on this..
TSM Server 5.2.4.0
AIX 5.2
Atape 9.6.0.0
We have a shared 3584library with 12 LTO1, 15 LTO2 and 3 LTO3 drives all
fibre attached.
The mountlimits in my devclasses are set as follows
LTO1 12
LTO2 16
LTO3 3
At the moment I clearly have 2 LTO3 drives available with nothing
mounted in them (DRIVE34 and DRIVE35)
3584_SHWD DRIVE01 ULTRIUMC,ULTRIUM
LOADED CARSINGTON
3584_SHWD DRIVE02 ULTRIUMC,ULTRIUM
LOADED CARSINGTON
3584_SHWD DRIVE03 ULTRIUMC,ULTRIUM
LOADED CARSINGTON
3584_SHWD DRIVE04 ULTRIUMC,ULTRIUM
LOADED CARSINGTON
3584_SHWD DRIVE05 ULTRIUMC,ULTRIUM
LOADED CARSINGTON
3584_SHWD DRIVE06 ULTRIUMC,ULTRIUM
EMPTY
3584_SHWD DRIVE07 ULTRIUMC,ULTRIUM
LOADED CARSINGTON
3584_SHWD DRIVE08 ULTRIUMC,ULTRIUM
LOADED CARSINGTON
3584_SHWD DRIVE09 ULTRIUMC,ULTRIUM
LOADED CARSINGTON
3584_SHWD DRIVE0A ULTRIUMC,ULTRIUM
EMPTY
3584_SHWD DRIVE0B ULTRIUMC,ULTRIUM
EMPTY
3584_SHWD DRIVE0C ULTRIUMC,ULTRIUM
LOADED CARSINGTON
3584_SHWD DRIVE11 ULTRIUM2C,ULTRIU
EMPTY
3584_SHWD DRIVE12 ULTRIUM2C,ULTRIU
EMPTY
3584_SHWD DRIVE13 ULTRIUM2C,ULTRIU
EMPTY
3584_SHWD DRIVE14 ULTRIUM2C,ULTRIU
LOADED CARSINGTON
3584_SHWD DRIVE15 ULTRIUM2C,ULTRIU
EMPTY
3584_SHWD DRIVE16 ULTRIUM2C,ULTRIU
LOADED CARSINGTON
3584_SHWD DRIVE21 ULTRIUM2C,ULTRIU
LOADED CARSINGTON
3584_SHWD DRIVE22 ULTRIUM2C,ULTRIU
EMPTY
3584_SHWD DRIVE23 ULTRIUM2C,ULTRIU
LOADED CARSINGTON
3584_SHWD DRIVE24 ULTRIUM2C,ULTRIU
EMPTY
3584_SHWD DRIVE25 ULTRIUM2C,ULTRIU
LOADED CARSINGTON
3584_SHWD DRIVE26 ULTRIUM2C,ULTRIU
EMPTY
3584_SHWD DRIVE31 ULTRIUM2C,ULTRIU
EMPTY
3584_SHWD DRIVE32 ULTRIUM2C,ULTRIU
EMPTY
3584_SHWD DRIVE33 ULTRIUM2C,ULTRIU
LOADED CARSINGTON
3584_SHWD DRIVE34 ULTRIUM3C,ULTRIU
EMPTY
3584_SHWD DRIVE35 ULTRIUM3C,ULTRIU
EMPTY
3584_SHWD DRIVE36 ULTRIUM3C,ULTRIU
LOADED CARSINGTON
I have a space reclamation process running for one of my LTO3 storage
pools but its now been waiting for a mount point for too long.
This is an onsite storage pool.
The drives are online, I've checked the paths and they are correct and
online, there are no mount errors in actlog.
Process Process Description Status
Number
-------- --------------------
-------------------------------------------------
3,380 Space Reclamation Volume SH0885L3 (storage pool
RMM_VDC_DATA_PRIM_LTO3), Moved
Files: 0, Moved
Bytes: 0, Unreadable Files: 0,
Unreadable Bytes:
0. Current Physical File
(bytes):
23,989,533 Waiting for mount
point in device
class ULTRIUM3 (2225 seconds).
So has anyone got any ideas... let me know if you need more
information..
Thanks
Chris
___________________________ Disclaimer Notice ____________________ This
message and any attachments are confidential and should only
be read by those to whom they are addressed. If you are not the intended
recipient, please contact us, delete the message from your
computer and destroy any copies. Any distribution or copying without our
prior permission is prohibited.
Internet communications are not always secure and therefore the E.ON
Group does not accept legal responsibility for this message.
The recipient is responsible for verifying its authenticity before
acting on the contents. Any views or opinions presented are
solely those of the author and do not necessarily represent those of the
E.ON Group.
E.ON UK plc, Westwood Way, Westwood Business Park, Coventry, CV4 8LG.
Registered in England & Wales No. 2366970
E.ON UK Trading Ltd, Westwood Way, Westwood Business Park, Coventry, CV4
8LG Registered in England & Wales No. 4178314
E.ON UK Trading Ltd is authorised and regulated by the Financial
Services Authority to carry out energy investment activities.
Telephone +44 (0) 2476 42 4000
Fax +44 (0) 2476 42 5432
|