Re: LTO Tape Question
2004-03-10 11:54:45
It is placed in slot 10.
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Karel Bos
Sent: March 10, 2004 11:41 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: LTO Tape Question
Hi,
Couple of things could be causing this. Most likely, the tape isn't available
in the by TSM mentioned slot.
- Slot 10 of a STK L700 Library is the upper import/export slot of this bulk
station. Is the tape placed in this slot, or is it placed any other slot?
Regards,
Karel
-----Oorspronkelijk bericht-----
Van: Jones, Kelli [mailto:JonesK AT CHESTERFIELD DOT GOV]
Verzonden: woensdag 10 maart 2004 17:14
Aan: ADSM-L AT VM.MARIST DOT EDU
Onderwerp: LTO Tape Question
TSM 5.1.7.0
AIX 5.0
STK L700 Library
IBM LTO Drives
I have a volume (000005) that is giving me a fit! Somehow, during library
servicing ( I think), volume was removed from library. The volume contains a
small amount of data, but contains data none the less. There are no read or
write errors. However, when I attempt to check it back in (I have used the
search=bulk command, I have named the volume, etc, etc) it fails with an
ANR8942E. The message sometimes states: 'Cannot move volume NOT KNOWN from
slot 10 (cap) to clot XXX' - (the slot # varies) but it also sometimes says:
'Cannot move volume 000005 from slot 10 to slot XXX'. I have run audits
and I have tried labeling it (overwrite=no), I have tried moving the data
(which fails because it needs the volume to be checked in and it can't be
checked in!) Of course, auditing the volume doesn't work for the same reason.
I am probably missing something very simple I'm sure but I just can't put my
finger on it...any help would be appreciated.
Thanks!
Kelli
Chesterfield County
jonesk AT chesterfield DOT gov
804-748-1951
|
|
|