Re: Excessive Read Errors on LTO
2001-05-18 13:36:39
Subject: |
Re: Excessive Read Errors on LTO |
From: |
George Lesho <glesho AT AFCE DOT COM> |
Date: |
Fri, 18 May 2001 12:39:53 -0500 |
"The SCSI Bench Reference" by Jeffrey D. Stai is published by ENDL Publications
ISBN 1-879936-07-0
Special Sales/Library Marketing
ENDL Publications
14426 Black Walnut Court
Saratoga, CA 95070
--------
George Lesho
George Lesho
Storage/System Admin
AFC Enterprises
Lisa Cabanas <CABANL AT MAIL.MODOT.STATE.MO DOT US> on 05/17/2001 01:52:40 PM
Please respond to "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To: ADSM-L AT VM.MARIST DOT EDU
cc: (bcc: George Lesho/Partners/AFC)
Fax to:
Subject: Re: Excessive Read Errors on LTO
ew ew!! where did you get your handy SCSI bench reference? Sounds like
something I'd like to put into my aresenal!!
-lisa
George Lesho <glesho AT AFCE DOT COM>
George Lesho <glesho AT AFCE DOT COM>
05/17/2001 11:01 AM
Please respond to "ADSM: Dist Stor Manager"
To: ADSM-L AT VM.MARIST DOT EDU
cc: (bcc: Lisa Cabanas/SC/MODOT)
Subject: Re: Excessive Read Errors on LTO
My handy SCSI bench reference says there is a medium error (Key=03) and
the
sense data ASC=14 ASCQ=00
indicates "recorded entity not found"... think you might have bad media...
George Lesho
Storage/System Admin
AFC Enterprises
Ruddy STOUDER <Ruddy.Stouder AT IRISLINK DOT COM> on 05/17/2001 10:38:44 AM
Please respond to "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To: ADSM-L AT VM.MARIST DOT EDU
cc: (bcc: George Lesho/Partners/AFC)
Fax to:
Subject: Excessive Read Errors on LTO
Hello,
My configuration is TSM Server 4.1.2, NT4.0 SP6, LTO 3583 with 2 tape
drives 3580 connected via Adaptec 29160. Drivers are the IBM ones in
version 1.1.7.3
Backups are running perfectly, restores are also running perfectly but
during the week-end, when reclamation is running, I get the following
error messages :
05/08/2001 16:39:04 ANR1417W Access mode for volume 265AADL1 now set
to
"read-only" due to excessive read error.
05/08/2001 16:39:37 ANR8302E I/O error on drive DRIVE2 (\\.\TAPE1)
(OP=LOCATE,
CC=0, KEY=03, ASC=14, ASCQ=00,
SENSE=70.00.03.00.00.00.-
00.1C.00.00.00.00.14.00.06.00.21.80.FF.FF.00.02.00.00.0-
0.00.00.00.00.19.00.01.35.A2.02.00,
Description=An
undetermined error has occurred). Refer to
Appendix D in
the 'Messages' manual for recommended action.
05/08/2001 16:39:37 ANR8359E Media fault detected on LTO volume
265AADL1 in
drive DRIVE2 (\\.\TAPE1) of library LIB3583.
Any idea ?
Many thanks in advance,
Ruddy Stouder
System Engineer
I.R.I.S.
Rue du Bosquet 10 - Parc Scientifique de Louvain-La-Neuve
B- 1435 Mont-Saint-Guibert
ruddy.stouder AT irislink DOT com
http://www.irislink.com
Tel: +32 (0)10 48 75 10 - Fax: +32 (0)10 48 75 40
|
|
|