ADSM-L

Re: Antwort: Using more than 1 tape for migration

1998-09-09 08:59:59
Subject: Re: Antwort: Using more than 1 tape for migration
From: Dwight Cook <decook AT AMOCO DOT COM>
Date: Wed, 9 Sep 1998 07:59:59 -0500
     Now remember...
     No matter what the other settings are, there will only be a single
     migration process for each client's data in a storage pool.  Once you
     get down to a single client's data there will only be a single
     migration process.


______________________________ Reply Separator _________________________________
Subject: Re: Antwort: Using more than 1 tape for migration
Author:  Andrew.Swift (Andrew.Swift AT central.colesmyer.com DOT au) at 
unix,mime
Date:    9/8/98 10:03 PM


I have done both of these on ADSM v 3.1.1.5 for 3494 with 2x3590 drives,
and migrations and backup storage pools still only use 1 drive !!

Any suggestions ?
Andrew Swift
*andrew.swift AT colesmyer.com DOT au
*61 (3) 9483 7629


> -----Original Message-----
> From: Sabine Rettenberger [SMTP:Sabine.Rettenberger AT WOLF-HEIZTECHNIK DOT 
> DE]
> Sent: Wednesday, August 26, 1998 11:33 PM
> To:   ADSM-L AT VM.MARIST DOT EDU
> Subject:      Antwort: Using more than 1 tape for migration
>
> Hi,
>
> in STORAGE-POOLS -> Migration(2 of 2)  there is a Option
> "Migration-Processes".
>
> You may set it  >1 and the Device-Class "Mount-Limit" must be also > 1.
>
>
>
> With best regards
>
> Sabine Rettenberger
<Prev in Thread] Current Thread [Next in Thread>