Andrew,
I don't see my disk migration use multiple drives, but my backup storage
pool does. Do you specify -maxpr=n where n=some number greater than 1? You
have to add that to your backup command.
Tina
> -----Original Message-----
> From: Andrew Swift [SMTP:Andrew.Swift AT CENTRAL.COLESMYER.COM DOT AU]
> Sent: Tuesday, September 08, 1998 10:04 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: Antwort: Using more than 1 tape for migration
>
> I have done both of these on ADSM v 3.1.1.5 for 3494 with 2x3590 drives,
> and migrations and backup storage pools still only use 1 drive !!
>
> Any suggestions ?
> Andrew Swift
> *andrew.swift AT colesmyer.com DOT au
> *61 (3) 9483 7629
>
>
> > -----Original Message-----
> > From: Sabine Rettenberger [SMTP:Sabine.Rettenberger AT WOLF-HEIZTECHNIK DOT
> > DE]
> > Sent: Wednesday, August 26, 1998 11:33 PM
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: Antwort: Using more than 1 tape for migration
> >
> > Hi,
> >
> > in STORAGE-POOLS -> Migration(2 of 2) there is a Option
> > "Migration-Processes".
> >
> > You may set it >1 and the Device-Class "Mount-Limit" must be also > 1.
> >
> >
> >
> > With best regards
> >
> > Sabine Rettenberger
|