Hey guys,
I'm trying to share a library between a Windows server (lib client, TSM 6.2, called "TSM2") and an AIX server (lib manager, TSM 5.5, called "TSM"). I'm not 100% sure on the path definitions in TSM though.
My 4 drives and library work fine on the aix side. The library is connected to /dev/smc0, and the drives are connected to /dev/rmt0 to /dev/rmt3. What I'm curious about is the paths that I define from the client to the drives. Since they client is windows, should the paths be using the windows device, like this?
define path tsm2 drive1 srct=server destt=drive library=ltolib device=mt3.0.0.3 autodetect=yes
(similar paths for the other 3 drives)
Or should the paths for tsm2 use the /dev paths from the AIX box? The IBM documentation is just not very clear on this stuff.
Thanks in advance.
I'm trying to share a library between a Windows server (lib client, TSM 6.2, called "TSM2") and an AIX server (lib manager, TSM 5.5, called "TSM"). I'm not 100% sure on the path definitions in TSM though.
My 4 drives and library work fine on the aix side. The library is connected to /dev/smc0, and the drives are connected to /dev/rmt0 to /dev/rmt3. What I'm curious about is the paths that I define from the client to the drives. Since they client is windows, should the paths be using the windows device, like this?
define path tsm2 drive1 srct=server destt=drive library=ltolib device=mt3.0.0.3 autodetect=yes
(similar paths for the other 3 drives)
Or should the paths for tsm2 use the /dev paths from the AIX box? The IBM documentation is just not very clear on this stuff.
Thanks in advance.