Hi,
I'm facing problems probably concerning IBM device driver.
After each reboot of our new installed TSM Server, a request to mount
a tape is answered with
ANR8779E unable to open drive \\.\tape0, error number=5 (or \\.\tape10, tape31 ...)
Win2003 SP2 (new installation)
TSM Server 5.5.2
Devdrvr: 6.2.0.4
Library: ACSLS VTL CentricStor VTA2000
32 Drives (configured as LTO2) connected via Qlogic HBA QLE2462 (Version 9.1.4.15)
LibAttach 1.4.2
What have I done so far:
- installed Win2k3 SP2
- installed IBm DevDrvr ("install_exclusive.exe" - 6.2.0.4)
- installed TSM 5.5.2 (without TSMdevdrvr)
- define library .... : o.k.
- define drive ... acsdrvid=1,1,1,0 : o.k.
- define path ... device=\\.\tape0 ... : ANR8779E Errno=5
- running thru the "Update Driver" -wizzard for all drives (.. don't search ...) and installing
"IBM Ultrium II tape Drive"-Driver : ALL pathes can be defined and all drives can be used
without any problems
- Rebooting the Server: each mount request leads again to ANR8779E err no=5
- Updating the drives thru the wizzard: everything's fine again ... until ...
Well - any hints where to look?
Thx
sd
I'm facing problems probably concerning IBM device driver.
After each reboot of our new installed TSM Server, a request to mount
a tape is answered with
ANR8779E unable to open drive \\.\tape0, error number=5 (or \\.\tape10, tape31 ...)
Win2003 SP2 (new installation)
TSM Server 5.5.2
Devdrvr: 6.2.0.4
Library: ACSLS VTL CentricStor VTA2000
32 Drives (configured as LTO2) connected via Qlogic HBA QLE2462 (Version 9.1.4.15)
LibAttach 1.4.2
What have I done so far:
- installed Win2k3 SP2
- installed IBm DevDrvr ("install_exclusive.exe" - 6.2.0.4)
- installed TSM 5.5.2 (without TSMdevdrvr)
- define library .... : o.k.
- define drive ... acsdrvid=1,1,1,0 : o.k.
- define path ... device=\\.\tape0 ... : ANR8779E Errno=5
- running thru the "Update Driver" -wizzard for all drives (.. don't search ...) and installing
"IBM Ultrium II tape Drive"-Driver : ALL pathes can be defined and all drives can be used
without any problems
- Rebooting the Server: each mount request leads again to ANR8779E err no=5
- Updating the drives thru the wizzard: everything's fine again ... until ...
Well - any hints where to look?
Thx
sd