TonyLeLerre
Newcomer
- Joined
- Aug 22, 2003
- Messages
- 1
- Reaction score
- 0
- Points
- 0
ANR8302E I/O error on drive DRIVE4 (\\.\TAPE3) (OP=OFFL,
Error Number=21, CC=0, KEY=02, ASC=3A, ASCQ=00,
SENSE=70.00.02.00.00.00.00.1C.00.00.00.00.3A.00.00.00.10-
.13.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.03.1-
4.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.-
00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00-
.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.0-
0.00.00.00.00, Description=An undetermined error has
occurred). Refer to Appendix D in the 'Messages' manual
for recommended action.
I have perfomed a v4.1.0 to v5.1.7 TSM upgrade (Win 2K). Since this has completed I am getting the above errors against all 4 LTO drives in our IBM3584 tape library. The library had been working fine with v4.1.0 and this has only started to happen since the upgrade.
Any jobs which try and use the library to write to tapes fail. TSM is also stating that the library needs to be auidted but this has already run and completed OK.
If anyone has any ideas I would be grateful as I cannot perform any backups to tape.
Many Thanks
Tony
[email protected]
Error Number=21, CC=0, KEY=02, ASC=3A, ASCQ=00,
SENSE=70.00.02.00.00.00.00.1C.00.00.00.00.3A.00.00.00.10-
.13.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.03.1-
4.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.-
00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00-
.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.0-
0.00.00.00.00, Description=An undetermined error has
occurred). Refer to Appendix D in the 'Messages' manual
for recommended action.
I have perfomed a v4.1.0 to v5.1.7 TSM upgrade (Win 2K). Since this has completed I am getting the above errors against all 4 LTO drives in our IBM3584 tape library. The library had been working fine with v4.1.0 and this has only started to happen since the upgrade.
Any jobs which try and use the library to write to tapes fail. TSM is also stating that the library needs to be auidted but this has already run and completed OK.
If anyone has any ideas I would be grateful as I cannot perform any backups to tape.
Many Thanks
Tony
[email protected]