Veritas-bu

Re: [Veritas-bu] How to get capacity or type of tape media

2008-05-14 10:18:17
Subject: Re: [Veritas-bu] How to get capacity or type of tape media
From: netbackup AT whelan-consulting.co DOT uk
To: <veritas-bu AT mailman.eng.auburn DOT edu>
To: <kmiele01 AT gmail DOT com>
Date: Wed, 14 May 2008 15:56:40 +0200
Try using the scan command:
scan or scan -tape or scan -changer
Example output (scan):
------------------------------------------------------------------------
Device Name  : ""
Passthru Name: ""
Volume Header: ""
Port: 2; Bus: 0; Target: 1; LUN: 0
Inquiry    : "HP      EML E-Series    1222"
Vendor ID  : "HP      "
Product ID : "EML E-Series    "
Product Rev: "1222"
Serial Number: "GB80606W91"
WWN          : ""
WWN Id Type  : 0
Device Identifier: ""
Device Type    : SDT_CHANGER
NetBackup Robot Type: 8
Removable      : Yes
Device Supports: SCSI-5
Number of Drives : 8
Number of Slots  : 230
Number of Media Access Ports: 15
Drive 1 Serial Number      : "HU10552GGW"
Drive 2 Serial Number      : "HU10552GGD"
Drive 3 Serial Number      : "HU10552GGC"
Drive 4 Serial Number      : "HU10552GP3"
Drive 5 Serial Number      : "HU10716GAG"
Drive 6 Serial Number      : "HU10716GCK"
Drive 7 Serial Number      : "HU10716G9D"
Drive 8 Serial Number      : "HU10716G9Y"
Flags : 0x0
Reason: 0x0
------------------------------------------------------------
Device Name  : "Tape2"
Passthru Name: "Tape2"
Volume Header: ""
Port: 2; Bus: 0; Target: 1; LUN: 1
Inquiry    : "HP      Ultrium 3-SCSI  L6CS"
Vendor ID  : "HP      "
Product ID : "Ultrium 3-SCSI  "
Product Rev: "L6CS"
Serial Number: "HU10552GGW"
WWN          : ""
WWN Id Type  : 0
Device Identifier: ""
Device Type    : SDT_TAPE
NetBackup Drive Type: 16
Removable      : Yes
Device Supports: SCSI-3
Flags : 0x0
Reason: 0x0
------------------------------------------------------------

 

All,
I am trying to figure out how I can get the capacity or type of tape media from NetBackup. I don't see anywhere where I can get Raw Capacity of a tape, but see that bpmedialist does show density. The problem is that I am seeing hcart instead of DLT or LTO, etc.... I have also tried vmquery -a, but that doesn't show me enough detail.

Is there anyway to get the actual raw capacity or actual media type from NetBackup?
Thanks in advance.
-Kevin

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu