[Veritas-bu] Error 219
2001-04-17 15:10:21
/usr/openv/netbackup/bin/admincmd/bpschedreq -read_stunits
This is 'fixed' in 3.2 and following.
David
<><><><><><><><><><><><><><><><><><><><>
David A. Chapa
Consulting Manager
DataStaff, Inc.
847 413 1144
http://www.consulting.datastaff.com
---------------------------------------
NBU-LSERV AT datastaff DOT com - Adv. Scripting
http://www.xbpadm-commands.com
-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of
olaf_behnke AT de.schindler DOT com
Sent: Tuesday, April 17, 2001 11:07 AM
To: veritas-bu AT eng.auburn DOT edu
Subject: [Veritas-bu] Error 219
Hi all,
this morning one of our dlt drives went down. After solving the problem I
put the drive into up state. The following jobs - scheduled an hour later -
stopped with error 219 (required storage unit is unavailable). I know from
the past, that I have to wait some hours until NB master will get the info
that the drive is up again. If I don't want to wait I have to stop and
restart all NB master processes. I decided to restart NB master today but
have anyone a better solution?
Environment: NBU 3.1 on HPUX 10.20, DLT Library HP 4845A (like StorageTek
98..).
Regards
Olaf Behnke
Schindler Deutschland Holding GmbH
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|