|
Re: [Networker] Networker tape library - tapes showing as unlabelled??
2008-11-18 12:11:30
This sounds like a configuration error -- drives or slots being out of
order -- rather than a tape that just appears as <unlabeled>. I've
never experienced that problem -- and I'd be really upset with EMC if
some critical tape suddenly had the wrong label on it.
Frank
On 11/18/08 10:53 AM, Jóhannes Karl Karlsson wrote:
I've also seen this. That was just after I deleted an old library from the NW server (Networker 7.4.2 backing up to EDL 4200). The slots, barcodes and volume name should be consistent in my case. Suddenly,in slot 399, the media with barcode 399 got volume name 406. The media in slot 406 then got "unlabeled".
I tried hard reset with nsrjb -HHEvvv, but no change in my case. I ended up with relabeling the tapes, and then do the hard reset.
--
Frank Swasey | http://www.uvm.edu/~fcs
Sr Systems Administrator | Always remember: You are UNIQUE,
University of Vermont | just like everyone else.
"I am not young enough to know everything." - Oscar Wilde (1854-1900)
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|
