[Networker] The volid on tape and the one in media base is not the same!
2008-05-26 08:45:53
i have 2 drivers :
lsdev -Cc tape ==>
rmt0 Available 08-08-00-6,0 LVD SCSI 4mm Tape Drive
rmt1 Available 0A-08-02 Other FC SCSI Tape Drive
rmt2 Available 0A-08-02 Other FC SCSI Tape Drive
so,i stopped the networker daemons (nsr_hutdown -aq);opened the door of my
library L40 and i puted one tape in the first driver :/dev/rmt1 manually and i
test the command :
mt -f /dev/rmt1 offline
after that i make the same test withe the driver number 2 /dev/rmt2
conclusion :
no probleme withe the order of drivers,the drivers behavior is corect !!!
so the problem is not the order of drivers ... or mybe this is the cause and i
don't know how to test it ?
+----------------------------------------------------------------------
|This was sent by bob_omar_31 AT yahoo DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|