[Networker] SCSI ID changing after rebooting the server
2008-05-20 00:09:59
We have a sun v480 server running legato networker backup and whenever we
reboot the server the scsi dev changes from [email protected] to [email protected].
this started a month back when the server started rebooting randomly. The scsi
dev is seen when we issue the inquire command from legato. It has been working
fine from past 3 years until the recent abnormal reboots. If we run EMCGrab on
the host it sets the scsidev back to [email protected].
BEFORE REBOOT
[email protected]:STK L700 0311|Autochanger (Jukebox)
S/N: MPC51002464
WWNN=500104F0006DADE2
WWPN=500104F0006DB263
PORT=00000001
[email protected]:HP Ultrium 2-SCSI K710|Tape, /dev/rmt/0cbn
S/N: HU107417CR
ATNN=HP Ultrium 2-SCSI
HU107417CR
WWNN=50060B0000361792
WWPN=50060B0000361790
PORT=00000001
[email protected]:HP Ultrium 2-SCSI K541|Tape, /dev/rmt/1cbn
S/N: HUM4D00010
ATNN=HP Ultrium 2-SCSI
HUM4D00010
WWNN=50060B000020597A
WWPN=50060B0000205978
PORT=00000001
AFTER REBOOT
[email protected]:STK L700 0311|Autochanger (Jukebox)
S/N: MPC51002464
WWNN=500104F0006DADE2
WWPN=500104F0006DB263
PORT=00000001
[email protected]:HP Ultrium 2-SCSI K710|Tape, /dev/rmt/0cbn
S/N: HU107417CR
ATNN=HP Ultrium 2-SCSI
HU107417CR
WWNN=50060B0000361792
WWPN=50060B0000361790
PORT=00000001
[email protected]:HP Ultrium 2-SCSI K541|Tape, /dev/rmt/1cbn
S/N: HUM4D00010
ATNN=HP Ultrium 2-SCSI
HUM4D00010
WWNN=50060B000020597A
WWPN=50060B0000205978
PORT=00000001
Any one who might have faced a similar issue and resolved it can provide some
input on the same
+----------------------------------------------------------------------
|This was sent by prasad_sherigar AT hotmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|