Hi folks,
I have a Server with three tape drives hooked up to it.
I have a dedicated storage node with two tape drives hooked up to it.
All drives are in a qualstar TLS-4000 and the tape drives are Sony
700CDX AIT-3.
We're running Solaris 8 on the Networker server and 9 on the storage node.
We're at Networker 7.1.
My storage node can of course only write local data to tape.
My issue is that it only uses one drive! So it is trying to write 200+GB
nightly from three file systems on this host to one tape.
How can I make it use both tape drives?
Currently it is taking about 8 hours to backup about 200GB nightly to
one drive.
I would like to improve on that performance.
My two ideas are:
1: reduce the number of target streams on each drive to two and then
have one drive take two streams and the other take one stream.
2: Maybe the drives need to be shared with each other?
Many thanks,
Bill
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
| 