So, it's quite simple :

>From the system that will act as SN ...
1) load the Storage Node software (option
during setup.exe). Best is to run the same networker
version the backup server runs.

2) verify device assignment by running inquire command
from a cmd prompt.

3) launch "jbconfig -s <server>" from the storage Node
(in a cmd prompt).

Choose auto-detect jukebox,
fill Jukebox control path ([email protected])
for each tape drive, fill 
        the hostname of the controlling host
        tape drive's driver path (\\.\tapex)

That's it.

Have fun,

thierry

Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

HPCI - Storage & Server Integration Practice 
Tru64 Unix and Legato EBS Consultant
                                   
 *********       *********   HEWLETT - PACKARD
 *******    h      *******   1 Rue de l'aeronef/Luchtschipstraat
 ******    h        ******   1140 Bruxelles/Brussel/Brussels
 *****    hhhh  pppp *****   
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32 (0)2  / 729.85.42   
                             Mobile :   +32 (0)498/  94.60.85 
                             Fax :      +32 (0)2  / 729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/
________________________________________________________________________

MOBISTAR SA/NV 

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2  / 745.89.56  
6041 GOSSELIES                  Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM                         Web :   http://www.mobistar.be/
________________________________________________________________________

  


-----Original Message-----
From: Stéphane Caron [mailto:stcaron AT TELEBEC.QC DOT CA] 
Sent: Wednesday, December 04, 2002 10:12 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] SAN Storage Node


A jukebox !!!!


Stephane,

SAN Storage node is just the same of a Storage Node, except that
it only accept backups from him-self.

What are you installing ... A jukebox or a tape drive ?

Thanks,

Thierry

Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

HPCI - Storage & Server Integration Practice
Tru64 Unix and Legato EBS Consultant

 *********       *********   HEWLETT - PACKARD
 *******    h      *******   1 Rue de l'aeronef/Luchtschipstraat
 ******    h        ******   1140 Bruxelles/Brussel/Brussels
 *****    hhhh  pppp *****
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******
 *********       *********   Phone :    +32 (0)2  / 729.85.42
                             Mobile :   +32 (0)498/  94.60.85
                             Fax :      +32 (0)2  / 729.88.30
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/
________________________________________________________________________

MOBISTAR SA/NV

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81
Avenue Jean Mermoz, 32  Fax :   +32 (0)2  / 745.89.56
6041 GOSSELIES   Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM    Web :   http://www.mobistar.be/
________________________________________________________________________




-----Original Message-----
From: Stéphane Caron [mailto:stcaron AT TELEBEC.QC DOT CA]
Sent: Wednesday, December 04, 2002 5:09 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] San Storage Node


Hi All!!

I need a step by step procedure to install a San Storage Node. My backup
serveur ia a NT machine with Networker version 6.2 and my client node is
also a NT machine with Networker version 6.2.

Anybody can help me???

Thank
Stef

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=