On Wednesday, October 17, 2001 8:21 AM, Mark Stapleton
[SMTP:stapleto AT BERBEE DOT COM] wrote:
> It *appears* that lb0.0.0.7 is not the correct device for your
> library.
Thanks for the sugestion Mark,
We're sure that the address is correct.
The Tivoli Device Drives see the library at this address, and correctly
identifies the model, as well as the Tape drives.

> On Wed, 17 Oct 2001 07:26:14 -0700, it was written:
> >We just had a new Qualstar TLS 4480 Library installed to our WINNT Ver 3.7.3
> >server.
> >When we try to define the library, either from the command line or the
> >device
> >wizard,
> >the operation fails. The Library shows up in the TSM Device list, and id
> >properly identified
> >
> >The following are the errors received:
> >10/16/2001 12:06:58  ANR2017I Administrator XXXXXX  issued command: DEFINE
> >                      LIBRARY aitlib libtype=scsi device=lb0.0.0.7
> >10/16/2001 12:06:58  ANR8310E An I/O error occurred while accessing library
> >                      AITLIB.
> >10/16/2001 12:06:58  ANR8418E DEFINE LIBRARY: An I/O error occurred while
> >                      accessing library AITLIB.
> >
> >Both message ANR8310E and ANR8418E give the same description below:
> >
> >ANR8310E An I/O error occurred while accessing library name .
>
> It *appears* that lb0.0.0.7 is not the correct device for your
> library.
>
> --
> Mark Stapleton (stapleton AT berbee DOT com)