On Wed, 17 Oct 2001 07:26:14 -0700, it was written:
>We just had a new Qualstar TLS 4480 Library installed to our WINNT Ver 3.7.3
>server.
>When we try to define the library, either from the command line or the device
>wizard,
>the operation fails. The Library shows up in the TSM Device list, and id
>properly identified
>
>The following are the errors received:
>10/16/2001 12:06:58  ANR2017I Administrator XXXXXX  issued command: DEFINE
>                      LIBRARY aitlib libtype=scsi device=lb0.0.0.7
>10/16/2001 12:06:58  ANR8310E An I/O error occurred while accessing library
>                      AITLIB.
>10/16/2001 12:06:58  ANR8418E DEFINE LIBRARY: An I/O error occurred while
>                      accessing library AITLIB.
>
>Both message ANR8310E and ANR8418E give the same description below:
>
>ANR8310E An I/O error occurred while accessing library name .

It *appears* that lb0.0.0.7 is not the correct device for your
library.

--
Mark Stapleton (stapleton AT berbee DOT com)
Mark Stapleton (stapleton AT berbee DOT com)