On that note, what's the command line command/syntax for adding a new tape
to a library (TLD). I'd tried vmadd without success (had to resort to
vmadd to add to NBU database, then vmchange to move from the CAP to a free
library slot).
Thanks,
/Steve
-----
On Mon, 29 Jan 2001, [iso-8859-1] fx [François-Xavier Peretmere] wrote:
> > From: John Meyers [mailto:john.meyers AT wright DOT edu]
> > Sent: Monday 29 January, 2001 17:03
>
> > I'm just getting started with NetBackup 3.2GA on a Solaris 2.6 server,
> > and I'm wondering if there is a command line method of moving volumes
> > from a robot device to standalone (logically). The only documented
> > procedure I could find was via the media manager interface.
>
> check /usr/openv/volmgr/bin/vmchange command.
>
> something like
>
> # vmchange -M $master -new_v $outside_vg -m $tape
>
> will do the trick. there's too a "not documented but widely used"
> switch to eject the media, -e.
>
> fx
>
> #include <std_disclaimer.h>
>
> --
> fx AT veritas DOT com | The ten thousand things.
> François-Xavier Peretmere | How long do any persist?
> http://www.veritas.com/ | Netscape, too, has gone.
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
|