>Thanks for sharing your experience George.
>
>This is the primary reason I do not run the NMC on our NW Server...
>Too
>much interaction or inter-dependency between the two that must be
>learned through experiences such as yours. And EMC also recommends
>running NMC on a stand alone NW client as opposed to running it on
>the
>server, although they don't say you can't, they just suggest it runs
>better on something other than the server... Which has also been my
>experience so far. I first ran NMC on our NW server, then moved it to
>a
>client when the 7.6 NMC came out. It works fine with our 7.4.4
>server
>and is an improvement over the previous release of NMC.

I used to run NMC on the server, but started having so many problems with
jobs not finishing, that I finally moved it off onto a separate client ...
and all my problems went away. Apparently, if you have more than about 40
clients (I have 90+), then running NMC on the server can cause many issues.
This was on 7.4.5, I believe.

I had posted here about that, at the time. You might find it in the
archives.
To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER