Re: [Networker] how to use nsrjb to load, unload tapes in ndmp environment
2007-09-18 08:26:33
use normal nsrjb commands from the node that is handling the
robotic arm. no specific change if it is ndmp device or not.
load slot:
nsrjb -s <backupserver> -l -f <drive> -S <slot>
load volume:
nsrjb -s <backupserver> -l -f <drive> <volume>
unload drive :
nsrjb -s <backupserver> -u -f <drive>
if your jukebox is ndmp, then, issue the cmds from the backup server
adding "-j <jukebox name>" param (after the -s <server>)
refer to nsrjb man page for more options such "-v" for verbosed
output.
HTH
TH
Kind regards - Bien cordialement - Vriendelijke groeten,
Thierry FAIDHERBE
HP Services - Storage Division
Tru64 Unix and Legato Enterprise Backup Solutions Consultant
********* ********* HEWLETT - PACKARD SPRL/BVBA
******* h ******* Hermeslaan, 1a
****** h ****** B-1831 Diegem
***** hhhh pppp ***** BELGIUM
***** h h p p *****
***** h h pppp ***** Phone : +32 (0)2 / 729.85.42
****** p ****** Mobile : +32 (0)498/ 94.60.85
******* p ******* Fax : +32 (0)2 / 290.15.49
********* ********* Email/MSN : thierry.faidherbe(at)hp.com
Internet : http://www.hp.com/
I N V E N T
Enterprise number 0402.220.594 RPM/RPR Brussels
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Vernon Harris
Sent: mardi 18 septembre 2007 14:03
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] how to use nsrjb to load, unload tapes in ndmp
environment
Can someone please give me the syntax required to load
and unload tapes using nsrjb when the drives are
attached to a ndmp nas server??
Thanks
________________________________________________________________________
____
________
Luggage? GPS? Comic books?
Check out fitting gifts for grads at Yahoo! Search
http://search.yahoo.com/search?fr=oni_on_mail&p=graduation+gifts&cs=bz
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type
"signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
Message not available
- Re: [Networker] how to use nsrjb to load, unload tapes in ndmp environment,
Faidherbe, Thierry <=
|
|
|