[Bacula-users] Despooling attributes very slow

Hello All,

I have a small backup job that is hanging on despooling attributes.

media-dir No prior Full backup Job record found.

 No prior or suitable Full backup found in catalog. Doing FULL backup.

media-dir Start Backup JobId 6, Job=httpBackup.2014-11-14_17.31.36_08

 Using Device "FileStorage"

media-sd Volume "Remote-0001" previously written, moving to end of data.

 Ready to append to end of Volume "Remote-0001" size=12597390492

 Spooling data ...

media-sd Job write elapsed time = 00:24:20, Transfer rate = 3.968 M Bytes/second

 Committing spooled data to Volume "Remote-0001". Despooling 5,804,239,547 bytes ...

media-sd Despooling elapsed time = 00:02:20, Transfer rate = 41.45 M Bytes/second

media-sd Sending spooled attrs to the Director. Despooling 47,351,608 bytes ...

http-fd      /run is a different filesystem. Will not descend from / into it.

http-fd      /opt is a different filesystem. Will not descend from / into it.

Not a large amount of files and only around 6GB of data here... but this despooling has been going on for over 2 hours now.

Debian 7.7

Bacula 5.2.6 (mysql backend)

Modern PC. Dual core with 4GB of RAM. RAID5 3TB drives.

# hdparm -tT /dev/md3

/dev/md3:
Timing cached reads: 1724 MB in 2.00 seconds = 862.23 MB/sec
Timing buffered disk reads: 376 MB in 3.01 seconds = 125.06 MB/sec

Any assistance would be greatly appreciated

Will

------------------------------------------------------------------------------
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk

_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users