2010/8/20 Smaïne KAHLOUCH <smaine.kahlouch AT gmail DOT com>

Hi everyone,

I'm trying to configure a client in a remote network.
In order to work, i had to configure an address translation.
I also indicated the external ip address in the bacula-fd.conf. (this address is then translated to the real bacula server address)

The authentication seems to work but the client can't connect to the storage daemon. It still tries to connect to the FQDN.

Warning: bnet.c:864 Could not connect to Storage daemon on "fqdn" ERR=Connection timed out

The problem is that i can't modify the /etc/hosts because it will be overwritten by an cron script.

Is there an option to indicate the NAT address for that client ? Is there another way to do so ?

Regards,
Smaïne

------------------------------------------------------------------------------
This SF.net email is sponsored by

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users

------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev 

_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users