> For the last problem type mount. If that does not work type status storage 
> and select tape and post the output.



Device status:
Autochanger "Autochanger" with devices:
   "Tape" (/dev/nst0)
Device "FileStorage" (/tmp) is not open.
Device "Tape" (/dev/nst0) open but no Bacula volume is currently 
mounted.
    Device is BLOCKED waiting for mount of volume "LT1000L1",
       Pool:        Default
       Media type:  LTO3
    Slot 4 is loaded in drive 0.
    Total Bytes Read=0 Blocks Read=0 Bytes/block=0
    Positioned at File=0 Block=0


I did and unmount and then a mount and now I see the following:
Device status:
Autochanger "Autochanger" with devices:
   "Tape" (/dev/nst0)
Device "FileStorage" (/tmp) is not open.
Device "Tape" (/dev/nst0) open but no Bacula volume is currently 
mounted.
    Slot 4 is loaded in drive 0.
    Total Bytes Read=0 Blocks Read=0 Bytes/block=0
    Positioned at File=0 Block=0


+----------------------------------------------------------------------
|This was sent by syed AT logicscope DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------



------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev 
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users