Yes, I tried mounting and unmounting multiple times. I just double checked the 
changer, KL0339 is loaded into Drive 1. (/dev/st0). 

JJ

-----Original Message-----
From: John Drescher [mailto:drescherjm AT gmail DOT com] 
Sent: Friday, July 16, 2010 10:53 AM
To: Jeremiah D. Jester; bacula-users
Subject: Re: [Bacula-users] Please mount volume...

> Thanks for the reply. I issued an 'update slots' command. When I load slot 2, 
> it is still says it is loading slot 1 volume. However, when I look at the 
> physical auto changer slot 2 is empty leading me to believe that this is a 
> bacula inventory problem.
>
> Other thoughts?
>

Did you try mounting and unmounting? Can you look at the changer and
verify that the volume is in the drive using the changer front pannel?

I do have a concern about this volume because you are using /dev/st0
instead of /dev/nst0.

John

------------------------------------------------------------------------------
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users