Please stop bacula-sd (yes only the storage daemon)

then
Can you manually load the volume in the first tape drive (using the
autochanger console) then issue the following command after the load
is finished

bls -c /etc/bacula/bacula-sd.conf -V* -L /dev/nst0



Here is an example from my autochanger:
dev6 ~ # bls -c /etc/bacula/bacula-sd.conf -V* -L /dev/nst0
bls: match.c:249-0 add_fname_to_include prefix=0 gzip=0 fname=/
bls: butil.c:282 Using device: "/dev/nst0" for reading.
16-Jul 17:10 bls JobId 0: Invalid slot=0 defined in catalog for Volume
"*" on "LTO2-0" (/dev/nst0). Manual load may be required.
16-Jul 17:10 bls JobId 0: 3301 Issuing autochanger "loaded? drive 0" command.
16-Jul 17:10 bls JobId 0: 3302 Autochanger "loaded? drive 0", result:
nothing loaded.
16-Jul 17:11 bls JobId 0: Ready to read from volume "A00020" on device
"LTO2-0" (/dev/nst0).

Volume Label:
Id                : Bacula 1.0 immortal
VerNo             : 11
VolName           : A00020
PrevVolName       :
VolFile           : 0
LabelType         : VOL_LABEL
LabelSize         : 155
PoolName          : Scratch
MediaType         : LTO-2
PoolType          : Backup
HostName          : dev6
Date label written: 17-Oct-2006 16:29
bls: acquire.c:436-0 dir_update_vol_info. label=64 Vol=*


John

------------------------------------------------------------------------------
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users