Okay, here's more informational information. :)
I've attached the logs sections for both jobs.
For both jobs which required me to mount a tape I had something
like the following happen.
----------------------------------------
22-May 05:16 tibor-sd JobId 4223: 3301 Issuing autochanger "loaded? drive 0"
command.
22-May 05:16 tibor-sd JobId 4223: 3302 Autochanger "loaded? drive 0", result:
nothing loaded.
22-May 05:16 tibor-sd JobId 4223: 3304 Issuing autochanger "load slot 29, drive
0" command.
22-May 05:17 tibor-sd JobId 4223: 3305 Autochanger "load slot 29, drive 0",
status is OK.
22-May 05:17 tibor-sd JobId 4223: Volume "100116L2" previously written, moving
to end of data.
22-May 05:17 tibor-sd JobId 4223: Error: Unable to position to end of data on
device "NEO-LTO-0" (/dev/nst0): ERR=dev.c:946 ioctl MTIOCGET erro
r on "NEO-LTO-0" (/dev/nst0). ERR=Input/output error.
22-May 05:17 tibor-sd JobId 4223: Marking Volume "100116L2" in Error in Catalog.
22-May 05:17 tibor-sd JobId 4223: 3307 Issuing autochanger "unload slot 29,
drive 0" command.
22-May 05:17 tibor-sd JobId 4223: 3995 Bad autochanger "unload slot 29, drive
0": ERR=Child exited with code 1
Results=Unloading drive 0 into Storage Element 29...mtx: Request Sense: Long
Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=70 (Current)
mtx: Request Sense: Sense Key=Illegal Request
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 53
mtx: Request Sense: Additional Sense Qualifier = 02
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=no
mtx: Request Sense: SKSV=no
MOVE MEDIUM from Element Address 480 to 60 Failed
----------------------------------------
So, it came across a "bad" tape, puked, tried to unload to slot and
failed. It tried the unload twice (within the same minute) failed
both times, then sat there waiting for me to issue the mount command,
which succeeded.
Could it be a timing issue?
-John
On Fri, May 22, 2009 at 11:58:44AM -0400, John Lockard wrote:
> And if I mounted a tape immediately after and also made sure
> that automout was set to yes? Whenever I unmount a tape I
> always make sure to mount another in it's stead.
>
> I'll dig through previous and current job and daemon messages
> when I get back to my normal office.
>
> -John
>
> On Fri, May 22, 2009 at 11:03:51AM -0400, John Drescher wrote:
> > On Fri, May 22, 2009 at 10:45 AM, John Lockard <jlockard AT umich DOT edu>
> > wrote:
> > > Hi All,
> > >
> > > I know I don't have full information here, but don't want to send along
> > > my full config as I'll guess that's overkill.
> > >
> > > 22-May 06:17 tibor-sd JobId 4223: Please mount Volume "100027L2" or label
> > > a new one for:
> > > Job: Belobog-Data2-Users.2009-05-22_05.15.00_35
> > > Storage: "NEO-LTO-0" (/dev/nst0)
> > > Pool: Radev-Diff
> > > Media type: LTO-2
> > > 22-May 06:19 tibor-sd JobId 4209: Please mount Volume "000152L2" or label
> > > a new one for:
> > > Job: BackupCatalog.2009-05-21_23.10.00_21
> > > Storage: "NEO-LTO-1" (/dev/nst1)
> > > Pool: Weekly-Tape-WH
> > > Media type: LTO-2
> > >
> > > I have a Overland Neo 4000 Tape Library with 57 slots and 3 tape drives.
> > > My config is set to Automount tapes when needed. But, sometimes it
> > > doesn't
> > > and just sits there, waiting for me to manually load the requested tapes.
> > > I had two instances of that this morning. Both tapes were in the Library
> > > and checking which tapes Bacula thought were loaded showed both of these
> > > tapes as being "In Changer". I was able to easily do:
> > > mount storage=Overland_Neo_4000 drive=0 slot=30
> > > mount storage=Overland_Neo_4000 drive=1 slot=1
> > >
> > > Then my jobs continued running nicely.
> > >
> > > What would be the reasons that occasionally Bacula won't automount tapes
> > > which it knows are present?
> > >
> >
> > One reason is if you umounted the previous tape.
> >
> > John
> >
> >
>
> --
> "A photograph is usually looked at - seldom looked into." - Ansel Adams
> -------------------------------------------------------------------
> John M. Lockard | U of Michigan - School of Information
> Unix and Security Admin | 1214 SI North - 1075 Beal Ave.
> jlockard AT umich DOT edu | Ann Arbor, MI 48109-2112
> www.umich.edu/~jlockard | 734-615-8776 | 734-647-8045 FAX
> -------------------------------------------------------------------
>
> ------------------------------------------------------------------------------
> Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT
> is a gathering of tech-side developers & brand creativity professionals. Meet
> the minds behind Google Creative Lab, Visual Complexity, Processing, &
> iPhoneDevCamp asthey present alongside digital heavyweights like Barbarian
> Group, R/GA, & Big Spaceship. http://www.creativitycat.com
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
--
You're not how much money you have in the bank.
-------------------------------------------------------------------
John M. Lockard | U of Michigan - School of Information
Unix and Security Admin | 1214 SI North - 1075 Beal Ave.
jlockard AT umich DOT edu | Ann Arbor, MI 48109-2112
www.umich.edu/~jlockard | 734-615-8776 | 734-647-8045 FAX
-------------------------------------------------------------------
failed_belobog
Description: Text document
failed_backup_catalog
Description: Text document
------------------------------------------------------------------------------
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT
is a gathering of tech-side developers & brand creativity professionals. Meet
the minds behind Google Creative Lab, Visual Complexity, Processing, &
iPhoneDevCamp asthey present alongside digital heavyweights like Barbarian
Group, R/GA, & Big Spaceship. http://www.creativitycat.com _______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
