Amanda-Users

Re: amanda over wireless network

2005-11-18 14:04:28
Subject: Re: amanda over wireless network
From: Paul Yeatman <pyeatman AT mamacass.ucsd DOT edu>
To: "Scott R. Burns" <Scott.Burns AT Netcontech DOT Com>
Date: Fri, 18 Nov 2005 10:42:28 -0800
->>In response to your message<<-
  --received from Scott R. Burns--
>
> Could it be that Amanda has a maximum retries that was exceeded ?

Not that I'm aware but good question.

Paul

> 
> -----Original Message-----
> From: owner-amanda-users AT amanda DOT org
> [mailto:owner-amanda-users AT amanda DOT org]On Behalf Of Paul Yeatman
> Sent: Thursday, November 17, 2005 9:03 PM
> To: Paul Bijnens
> Cc: Amanda user's group
> Subject: Re: amanda over wireless network
> 
> 
> Hmmmm, I set the server side etimeout to 2600s.  Still get (from an
> amstatus)
> 
>       pjmac:/    0 planner: [Estimate timeout from pjmac]
> 
> and the amanda report now gives this (mind you, this client
> is the only entry in this "test" config)
> 
>       Estimate Time (hrs:min)    2:10
> 
> 2 hours and 10 minutes!
> 
> The message from amandad on the client is virtually the same
> 
>       <snip>
>       amandad: time 0.038: running service
> "/usr/local/libexec/amanda/2.4.5p1/sendsize"
>       amandad: time 1244.905: sending REP packet:
>       ----
>       Amanda 2.4 REP HANDLE 000-30F3BC2A55000000 SEQ 1132261451
>       OPTIONS features=fffffeff9ffe7f;
>       / 0 SIZE 17648480
>       ----
> 
>       amandad: time 1254.905: dgram_recv: timeout after 10 seconds
>       amandad: time 1254.905: waiting for ack: timeout, retrying
>       amandad: time 1264.906: dgram_recv: timeout after 10 seconds
>       amandad: time 1264.906: waiting for ack: timeout, retrying
>       amandad: time 1274.906: dgram_recv: timeout after 10 seconds
>       amandad: time 1274.906: waiting for ack: timeout, retrying
>       amandad: time 1284.906: dgram_recv: timeout after 10 seconds
>       amandad: time 1284.906: waiting for ack: timeout, retrying
>       amandad: time 1294.907: dgram_recv: timeout after 10 seconds
>       amandad: time 1294.907: waiting for ack: timeout, giving up!
>       amandad: time 1294.907: pid 29584 finish time Thu Nov 17 14:52:41 2005
> 
> Shouldn't the approx. 1255s required to get the estimate fall clearly
> within the 2600s allowed?
> 
> Not sure where things are going wrong now
> 
> Paul
> --
> Paul Yeatman       (858) 534-9896        pyeatman AT ucsd DOT edu
>            ==================================
>            ==Proudly brought to you by Mutt==
>            ==================================
> 

-- 
Paul Yeatman       (858) 534-9896        pyeatman AT ucsd DOT edu
             ==================================
             ==Proudly brought to you by Mutt==
             ==================================