Re: Upgrade 3590s 1BA/1EA - Problems
2000-01-21 10:58:12
Subject: |
Re: Upgrade 3590s 1BA/1EA - Problems |
From: |
"Mauro M. TINELLI" <Mauro.TINELLI AT ST DOT COM> |
Date: |
Fri, 21 Jan 2000 16:58:12 +0100 |
Bob,
> We had problems after our upgrade to 3590Es with I/O errors (message
> ANR8302E). Sense indicated tape tensioning error. 3590E drive microcode
> installed by IBM was C747. Within a couple of days IBM recommended
upgrading
> to level CA70, which is supposed to fix this problem. We have had no
> problems of this nature since the code was upgraded (couple of weeks
> running).
>
Yes ... its D0IC_994.
> Also check that after the upgrade you did a "delete drive" and "define
> drive" for all the 3590Es; otherwise ADSM thinks they are still 3590Bs
Yes I did also that.
But the error come out at the end. Was the pressure of the vacuum
chamber. One of the CE change it on 2 drives without the gauge and it was
wrong!
Thank you very much
Mauro, STM
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Upgrade 3590s 1BA/1EA - Problems, Mauro M. TINELLI
- Re: Upgrade 3590s 1BA/1EA - Problems, Smith, Bob
- Re: Upgrade 3590s 1BA/1EA - Problems, Richard Sims
- Re: Upgrade 3590s 1BA/1EA - Problems, Smith, Bob
- Re: Upgrade 3590s 1BA/1EA - Problems, Horst Scherzer
- Re: Upgrade 3590s 1BA/1EA - Problems, Mauro M. TINELLI
- Re: Upgrade 3590s 1BA/1EA - Problems,
Mauro M. TINELLI <=
- Re: Upgrade 3590s 1BA/1EA - Problems, H.G.Borrmann
- Re: Upgrade 3590s 1BA/1EA - Problems, Mauro M. TINELLI
- Re: Upgrade 3590s 1BA/1EA - Problems, Magura, Curtis
- Re: Upgrade 3590s 1BA/1EA - Problems, Reinhold Wagner
- Re: Upgrade 3590s 1BA/1EA - Problems, J. Glauer
- Re: Upgrade 3590s 1BA/1EA - Problems, H.G.Borrmann
- Re: Upgrade 3590s 1BA/1EA - Problems, Mauro M. TINELLI
- Upgrade 3590s 1BA/1EA - Problems, Mauro M . TINELLI [mailto:Mauro.TINELLI
|
|
|