Re: [nv-l] Iintegration of HECL DirecWAY with Tivoli Netview
If you are not seeing traps, in the
trapd.log, nor any messages about invalid traps, then your DircetWay box
is not sending them, period.
There is no way that trapd can get a
trap and not log it or issue an error message.
You can get him to trace everything
that he sees by first configuring trapd to run with the -x option, (hex
dump all packets), using serversetup, and then toggling the trace off and
on with "trapd -T" from the command line. But to really
prove that nothing is coming in on port 162 udp, you will need to get an
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
<ananda AT bharatpetroleum DOT com>
Sent by: owner-nv-l AT lists.us.ibm DOT com
07/19/2004 05:35 AM
|<nv-l AT lists.tivoli DOT com>
|[nv-l] Iintegration of HECL
DirecWAY with Tivoli Netview|
We are having Tivoli NetView(7.1.3) on AIX 4.3.3.
Recently we installed HECL DirecWAY to monitor our VSATs (DPUs). These
VSATs(DPUs) are SNMP compliant but can not by pass HECL DirecWAY NMS. This
NMS(DirecWAY ) has been installed on HP platform and is collected information
about the status of VSATs(DPU).
Now, we wanted to integrate DirecWAY with our Tivoli NetView.
This NMs(DirecWAY) is also configured to send traps to NetView server.
But we are not getting these traps in trapd.log.
Ideally, we wanted these traps on TEC so that we can execute some TEC rules
as per our requirement.
Any idea how to achieve this?