nv-l

RE: [nv-l] Iintegration of HECL DirecWAY with Tivoli Netview

2004-07-20 07:17:22
Subject: RE: [nv-l] Iintegration of HECL DirecWAY with Tivoli Netview
From: "anand anupam" <ananda AT bharatpetroleum DOT com>
To: <nv-l AT lists.us.ibm DOT com>
Date: Tue, 20 Jul 2004 15:45:21 +0530
Hello James,
 
I have just noticed that some traps are comming as follows:-
 
1090124266 3  Sun Jul 20 10:47:46 2004 0.0.0.0                   ? Trap found 
with no known format in trapd.conf(4)
1090124266 3  Sun Jul 20 10:47:46 2004  0.0.0.0                   ?  
EnterpriseENTERPRISES (1.3.6.1.4.1.303.3.3.19.8.2) community public
1090124266 3  Sun Jul 20 10:47:46 2004  0.0.0.0                   ?  generic 
trap:6 specific trap:4
1090124266 3  Sun Jul 20 10:47:46 2004  0.0.0.0                   ?  
Timestamp:0 Agentaddr:0.0.0.0 args(3):
1090124266 3  Sun Jul 20 10:47:46 2004  0.0.0.0                   ?  [1] 
multimedia.nmsTraps.nmsTrapVars.nmsTrapVsatName(OctetString): BPST0292
1090124266 3  Sun Jul 20 10:47:46 2004  0.0.0.0                   ?  [2] 
prod.multimedia.nmsTraps.nmsTrapVars.nmsTrapNmd (OctetString): 
default1090124266 3  Sun Jul 18 10:47:46 2004  0.0.0.0                   ?  [3] 
prod.mu ltimedia.nmsTraps.nmsTrapVars.nmsTrapVsatIp (OctetString): 10.1.1.86

 
Probably these are the traps from DirectWays nms.
 
How I should configure trapd.conf for the required format/definition?
 
Regards,
Anupam
 
 -----Original Message-----
From: James Shanks [mailto:jshanks AT us.ibm DOT com]
Sent: Tuesday, July 20, 2004 2:53 PM
To: nv-l AT lists.us.ibm DOT com
Subject: RE: [nv-l] Iintegration of HECL DirecWAY with Tivoli Netview



I just noticed that you said "UDP socket in use". Yikes!! That means that trapd 
does not own the port he's configured to use, by default 162/udp. So he's not 
getting any external traps. What else did you put on this box which is getting 
them, because something else has the port, and trapd is not configured to get 
anything from that agent.

James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
Inactive hide details for "anand anupam" ' height=16 
src="cid:760370610@20072004-28c6" width=16>"anand anupam" <ananda AT 
bharatpetroleum DOT com>






        "anand anupam" <ananda AT bharatpetroleum DOT com> 
Sent by: owner-nv-l AT lists.us.ibm DOT com 

        07/20/04 02:00 AM 

        

        Please respond to
nv-l




To

<nv-l AT lists.us.ibm DOT com>  



cc

        

        
        

        
        



Subject

RE: [nv-l] Iintegration of HECL DirecWAY with Tivoli Netview    
                

Hello James,

We are not seeing any event neither in trapd.log nor in trapd.trace. I have 
already enabled -x option ( it says.. UDP socket is already in use.)

Through -T option, toggling has been enabled and there is no event/message in 
trapd.trace file.

The snmp trap from the DirectWay NMS (ip address 192.168.10.180) is coming on 
our NetView server (ip address 10.72.15.196) on 162 port that we have seen 
using sniffer. Also, there is no firewall in between.

Can you suggest, what all are required to be configured at NetView level to get 
the snmp trapds? Is any particular mibs to be loaded?

Regards,
Anupam



-----Original Message-----
From: James Shanks [ mailto:jshanks AT us.ibm DOT com]
Sent: Monday, July 19, 2004 5:27 PM
To: nv-l AT lists.us.ibm DOT com
Subject: Re: [nv-l] Iintegration of HECL DirecWAY with Tivoli Netview




If you are not seeing traps, in the trapd.log, nor any messages about invalid 
traps, then your DircetWay box is not sending them, period. 
There is no way that trapd can get a trap and not log it or issue an error 
message. 

You can get him to trace everything that he sees by first configuring trapd to 
run with the -x option, (hex dump all packets), using serversetup, and then 
toggling the trace off and on with "trapd -T" from the command line. But to 
really prove that nothing is coming in on port 162 udp, you will need to get an 
iptrace. 

James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group 



"anand anupam" <ananda AT bharatpetroleum DOT com> 
Sent by: owner-nv-l AT lists.us.ibm DOT com 


07/19/2004 05:35 AM 


Please respond to
nv-l



To
<nv-l AT lists.tivoli DOT com> 

cc

Subject
[nv-l] Iintegration of HECL DirecWAY with Tivoli Netview






Hello Everybody,

We are having Tivoli NetView(7.1.3) on AIX 4.3.3.

Recently we installed HECL DirecWAY to monitor our VSATs (DPUs). These 
VSATs(DPUs) are SNMP compliant but can not by pass HECL DirecWAY NMS. This 
NMS(DirecWAY ) has been installed on HP platform and is collected information 
about the status of VSATs(DPU). 

Now, we wanted to integrate DirecWAY with our Tivoli NetView.

This NMs(DirecWAY) is also configured to send traps to NetView server. But we 
are not getting these traps in trapd.log.

Ideally, we wanted these traps on TEC so that we can execute some TEC rules as 
per our requirement.

Any idea how to achieve this?

Regards,
Anupam










GIF image

GIF image