RE: [nv-l] Object in DB but not on map
2004-01-15 20:40:22
Hey
James,
Don't
mind Ray - he has good intentions. And - I trained him about NetView so
that explains a lot. =)
Thanks,
Ray
Westphal
Enteprise Rent-A-Car
Check first whether
you are running on a read-write map, and try stopping and restarting it first,
letting ipmap synchronize with the data base. If that doesn't do it, then I'd vote for Ray's database cleanup
commands and then a restart of the GUI because they force ipmap to re-evaluate
every object and symbol.
But I don't see much use in reset_ci (sorry Ray). It's mainly for
daemons, which have lost the ability to communicate with each other because
they don't know where they are. The only map activity is to update the
map location with mapadmin to guarantee that it resides on the correct
host.
James Shanks Level 3 Support for Tivoli NetView for UNIX
and Windows Tivoli Software / IBM Software Group
| "Erdey, Raymond M"
<Raymond.M.Erdey AT erac DOT com> Sent by: owner-nv-l AT lists.us.ibm DOT com
01/15/2004 05:15 PM Please respond to nv-l
| To:
<nv-l AT lists.us.ibm DOT com> cc:
Subject: RE: [nv-l] Object in
DB but not on map
|
If "/usr/OV/service/reset_ci" does not resolve the issue,
then you may have to perform a database cleanup... We like to use the following commands: ovmapcount -a
ovtopofix -a Don't forget to backup your databases before
running the above commands. Raymond Erdey -----Original
Message----- From: owner-nv-l AT lists.us.ibm DOT com
[mailto:owner-nv-l AT lists.us.ibm DOT com]On Behalf Of
DSullinger AT dot.state.az DOT us Sent: Thursday, January 15, 2004 3:31
PM To: nv-l AT lists.us.ibm DOT com Subject: RE: [nv-l] Object in
DB but not on map
"No symbols
representing objects found"
From: Erdey, Raymond M
[mailto:Raymond.M.Erdey AT erac DOT com] Sent: Thursday, January 15, 2004
1:44 PM To: nv-l AT lists.us.ibm DOT com Subject: RE: [nv-l]
Object in DB but not on map
What happens if you
search for the object by the "IP Address" "Attribute..". -----Original Message----- From:
owner-nv-l AT lists.us.ibm DOT com [mailto:owner-nv-l AT lists.us.ibm DOT com]On Behalf
Of DSullinger AT dot.state.az DOT us Sent: Thursday, January 15, 2004
1:41 PM To: nv-l AT lists.us.ibm DOT com Subject: RE: [nv-l]
Object in DB but not on map
I'm ahead of you... did that and it still isn't there, yet I can ping
the device and do a nmdemandpoll to it.
From: Erdey, Raymond M
[mailto:Raymond.M.Erdey AT erac DOT com] Sent: Thursday, January 15, 2004
12:23 PM To: nv-l AT lists.us.ibm DOT com Subject: RE: [nv-l]
Object in DB but not on map
Bounce netmon and
search for it after netmon restarts. -----Original Message----- From: owner-nv-l AT lists.us.ibm DOT com
[mailto:owner-nv-l AT lists.us.ibm DOT com]On Behalf Of
DSullinger AT dot.state.az DOT us Sent: Thursday, January 15, 2004
12:44 PM To: nv-l AT lists.us.ibm DOT com Subject: RE: [nv-l]
Object in DB but not on map
We did and it said that no devices were found in the map.
From: Erdey, Raymond M
[mailto:Raymond.M.Erdey AT erac DOT com] Sent: Thursday, January 15, 2004
11:31 AM To: nv-l AT lists.us.ibm DOT com Subject: RE: [nv-l]
Object in DB but not on map
Use the "Locate" menu
option and see if you can find the device that way on the Read/Write map... It
may have been placed automatically in a network segment on your map...
Raymond Erdey Enterprise Rent-A-Car System
Administrator Network Management System Administration Email:
raymond.m.erdey AT erac DOT com
Web: http://www.geocities.com/rerdey/
-----Original Message----- From:
owner-nv-l AT lists.us.ibm DOT com [mailto:owner-nv-l AT lists.us.ibm DOT com]On Behalf
Of DSullinger AT dot.state.az DOT us Sent: Thursday, January 15, 2004
11:20 AM To: nv-l AT lists.us.ibm DOT com Subject: RE: [nv-l]
Object in DB but not on map
We deleted an ATM router from our all submaps and waited for it to
rediscover the device an place it in the holding area. We waited a good
hour and it still didn't show up. I did a nmdemandpoll on both the hub
router connected to the ATM circuit and the ATM router itself. Demand
poll did poll the device, but it still never showed up on the map. Do I
need to do a ovtopofix -u to get it to show up? Thanks
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- RE: [nv-l] Object in DB but not on map, DSullinger
- RE: [nv-l] Object in DB but not on map, Erdey, Raymond M
- RE: [nv-l] Object in DB but not on map, DSullinger
- RE: [nv-l] Object in DB but not on map, Erdey, Raymond M
- RE: [nv-l] Object in DB but not on map, DSullinger
- RE: [nv-l] Object in DB but not on map, Erdey, Raymond M
- RE: [nv-l] Object in DB but not on map, DSullinger
- RE: [nv-l] Object in DB but not on map, Erdey, Raymond M
- RE: [nv-l] Object in DB but not on map, James Shanks
- RE: [nv-l] Object in DB but not on map,
Ray Westphal <=
- RE: [nv-l] Object in DB but not on map, Binder, Karin
- RE: [nv-l] Object in DB but not on map, DSullinger
|
|
|