Hi,

We have a brand new NS2000 (Auspex). The OS on it's host processor is 
Solaris 2.6. The Netbackup master on which the NDMP option is also installed 
is Ultra 10/Solaris 2.5.1, NB version 3.2.

On the Auspex I have a 2/68 ATL with 2 DLT 7000 drives with these paths:
Robotic controller: /dev/raxac/fsp0c6t0
Tape drive 1      : /dev/raxmt/fsp0c6t1
Tape drive 2      : /dev/raxmt/fsp0c7t1

On the NB master, this is what I did : /usr/openv/volmgr/bin/set_ndmp_attr 
-auth auspex_name root /usr/openv/volmgr/bin/set_ndmp_attr -robot 
auspex_name fsp0c6t0 6 0 0

When I try to test it from the NB master:
tldtest -r auspex_name:fsp0c6t0 -d1 auspex_name:fsp0c6t1

Opening auspex_name:fsp0c6t0
ndmp_scsi_set_target_func failed

What am I doing wrong? I tried this with the full device name of the robotic 
controller too.

Thanks!
Rasana




________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com