[Veritas-bu] Auspex and NDMP
2000-05-15 15:07:48
netbackup 3.2?
I'm not as familiar with the Auspex and the NDMP
configs, but what I would suggest is using
robtest
this passes all of the -r pathname -d1 devices without
having to type them all out evertime to tldtest. Just
in case there is an error in your device pathname.
-david
Quoting Rasana Atreya <rasana_atreya AT hotmail DOT com>:
> Hi,
>
> We have a brand new NS2000 (Auspex). The OS on it's
host processor is
> Solaris 2.6. The Netbackup master on which the NDMP
option is also
> installed
> is Ultra 10/Solaris 2.5.1, NB version 3.2.
>
> On the Auspex I have a 2/68 ATL with 2 DLT 7000
drives with these paths:
> Robotic controller: /dev/raxac/fsp0c6t0
> Tape drive 1 : /dev/raxmt/fsp0c6t1
> Tape drive 2 : /dev/raxmt/fsp0c7t1
>
> On the NB master, this is what I did :
/usr/openv/volmgr/bin/set_ndmp_attr
> -auth auspex_name root
/usr/openv/volmgr/bin/set_ndmp_attr -robot
> auspex_name fsp0c6t0 6 0 0
>
> When I try to test it from the NB master:
> tldtest -r auspex_name:fsp0c6t0 -d1
auspex_name:fsp0c6t1
>
> Opening auspex_name:fsp0c6t0
> ndmp_scsi_set_target_func failed
>
> What am I doing wrong? I tried this with the full
device name of the
> robotic
> controller too.
>
> Thanks!
> Rasana
>
>
>
>
>
________________________________________________________
________________
> Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com
>
> _______________________________________________
> Veritas-bu maillist - Veritas-
bu AT mailman.eng.auburn DOT edu
>
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-
bu
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
David A. Chapa 847 413 1144 p
Consulting Practice Mgr. 847 413 1168 f
DataStaff, Inc. http://www.datastaff.com
|
|
|