[Networker] Scanner/Index tape issue - EMC Networker 7.3.1
2013-01-22 18:21:49
Here is the output from the mt command:
Also the Device config is set to SCSI commands.
C:\Program Files\Legato\nsr\bin>mt -f \\.\Tape0 status
\\.\Tape0:
Media Capacity = 409.92GByte
Media Remaining = 341.42GByte
Media Blocksize = 0
Media Partition Count = 1
Media is write protected
default blocksize = 65536
maximum blocksize = 524288
minimum blocksize = 2
MaximumPartitionCount = 1
Partition = 0
Logical block position = 0
EOTWarningZoneSize = 0
Error Correction Enabled
CompressionEnabled
Features:
Performs SHORT erase operation
Performs LONG erase operation
Performs IMMEDIATE erase operation
Can report maximum tape capacity
Can report amount of tape remaining
Support FIXED block length mode
Support VARIABLE block length mode
Returns errors on write if tape is write - protected
Performs Hardware Error Correction
Supports hardware data compression
Can provide current absolute device block address
Can provide current logical block address and partition
Can physically load and / or unload tape
Support PREVENT / ALLOW Media Removal
Performs IMMEDIATE rewind operations
Allows Setting FIXED LENGTH or VARIABLE block sizes
Performs IMMEDIATE Load / Unload operations
Allows hardware data compression to be enabled / disabled
Can position tape to an absolute physical block
Performs IMMEDIATE absolute block positioning
Can position tape to a logical block(and partition)
Performs IMMEDIATE logical block positioning
Can position tape to END of RECORDED DATA
Can perform tape record positioning(backwards / forwards)
Can perform tape file positioning(backwards / forwards)
Can move backwards across records or filemarks or setmarks
Can write FILEMARKS
Performs IMMEDIATE tape mark write operations
+----------------------------------------------------------------------
|This was sent by fred.fernandez AT fh.com DOT au via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, (continued)
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, bingo
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, fredf
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, bingo
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, bingo
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, fredf
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, bingo
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, fredf
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, bingo
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, fredf
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, bingo
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1,
fredf <=
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, bingo
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, fredf
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, bingo
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, fredf
- [Networker] Scanner/Index tape issue - EMC Networker 7.3.1, bingo
|
|
|