Bacula-users

Re: [Bacula-users] Error talking to remote storage daemon

2017-07-31 17:31:23
Subject: Re: [Bacula-users] Error talking to remote storage daemon
From: Phil Stracchino <phils AT caerllewys DOT net>
To: bacula-users AT lists.sourceforge DOT net
Date: Mon, 31 Jul 2017 17:30:17 -0400
The message that this is a reply to arrived here trashed, with all Ana's
reply text missing.  So I'm answering here with my questions.


On 07/31/17 16:22, Steve Garcia wrote:
> ---- "Ana Emília M. Arruda" <emiliaarruda AT gmail DOT com> wrote: 
>>
>> You have your Director running at sleipnir host:
>>
>> root@sleipnir:/etc/bacula# bconsole
>> Connecting to Director sleipnir:9101
>> 1000 OK: 102 sleipnir-dir Version: 7.4.3 (18 June 2016)
>>
>> with the Autochanger configuration on Director:
>>
>> From bacula-dir.conf on sleipnir (where the director is):
>> Storage {
>>   Name = Library2
>> # Do not use "localhost" here
>>   Address = odin                # N.B. Use a fully qualified name here
>>   SDPort = 9103
>>   Password = "*****************"
>>   Device = AutochangerOdin
>>   Media Type = LTO6
>>   Autochanger = yes                   # enable for autochanger device
>> }
>>
>> And you have your remote Storage Daemon installed in a host called
>> odin with the following configuration:
>>
>> From the bacula-sd.conf on odin (where the library is):
>> Autochanger {
>>   Name = AutochangerOdin
>>   Device = Drive-1
>>   Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
>>   Changer Device = /dev/autochanger1
>> }
>>
>> Device {
>>   Name = Drive-1                      #
>>   Description = "LT06 inside Dell TL2000 Library"
>>   Drive Index = 0
>>   Media Type = LT06
>>   Archive Device = /dev/nst0
>>   AutomaticMount = yes;               # when device opened, read it
>>   AlwaysOpen = yes;
>>   RemovableMedia = yes;
>>   RandomAccess = no;
>>   AutoChanger = yes
>>   SpoolDirectory = "/var/spool/bacula"
>>   MaximumSpoolSize = 485G
>>   Maximum Network Buffer Size = 65536
>>   Offline On Unmount = no
>>   Alert Command = "sh -c 'smartctl -H -l error %c'"
>> }
>> This is perfect.


So with the pretend-single-drive-is-an-autochanger hack, I'm supposed to
give the *DIRECTOR* a Storage resource pointed to the "autochanger", and
I give the *STORAGE daemon* an Autochanger resource pointing to its
standalone drive as a Device?

If so, then I currently have it configured wrong.


-- 
  Phil Stracchino
  Babylon Communications
  phils AT caerllewys DOT net
  phil AT co.ordinate DOT org
  Landline: +1.603.293.8485
  Mobile:   +1.603.998.6958

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users

ADSM.ORG Privacy and Data Security by https://kimlaw.us