Hi steve,
It seems we have a configuration issue. It is not a good idea to have symlinks to sg devices. They can change after a server reboot.
**************
From the /dev directory on odin:lrwxrwxrwx 1 root root 3 Jun 5 17:42 /dev/autochanger1 -> sg3crw-rw---- 1 root tape 21, 3 Jun 1 15:01 /dev/sg3**************
This can be very probably causing this issue with the label command. But I can't confirm this because I have never tried this.
It is better to use the /dev/tape/by-id names and even better to create udev rules based on the tape library specific charactheristics such as serial number.
A "ls -lR /dev/tape" and "lsscsi -g" will help you.
Then you should chage:
Changer Device = /dev/autochanger1 with the by-id name for mediumx
And
Archive Device = /dev/nst0 with the by-id name for the tape drive (remember to use here the one that ends with -nst).
I noticed you have data spool configured. With an LTO6 It is very probably that you will slow down backups performance, unless you have clients with poor network performance.
Hope this helps you.
Best regards,
Ana