Bacula-users

Re: [Bacula-users] Bacula LTO-5

2017-06-01 09:07:04
Subject: Re: [Bacula-users] Bacula LTO-5
From: Cejka Rudolf <cejkar AT fit.vutbr DOT cz>
To: Steven Hammond <bcf1689 AT gmail DOT com>
Date: Thu, 1 Jun 2017 15:06:10 +0200
Cejka Rudolf wrote (2017/06/01):
> It is too low for LTO-5. It is at the lower limit before tape
> shoe shining, problably with some tape stops already here.
> The real limit is 47 MB/s for HP and 40 MB/s for IBM, but no
> guarantee it is correct.

Small clarification about this: Speeds 47 MB/s or 40 MB/s are
physical writing speeds after compression, so uncompressed datas
from server to tape drive have to be faster. And because of
variable compression ratio over time, typically between 1:1 and
2:1, then you are safe just with much bigger writing speeds.
>From the other side, if you have writing speed under 100 MB/s,
it is sometimes recommended to switch off compression, so that
even speeds between 50-100 MB/s are safe.

-- 
Rudolf Cejka <cejkar at fit.vutbr.cz> http://www.fit.vutbr.cz/~cejkar
Brno University of Technology, Faculty of Information Technology
Bozetechova 2, 612 66  Brno, Czech Republic

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users

<Prev in Thread] Current Thread [Next in Thread>

ADSM.ORG Privacy and Data Security by https://kimlaw.us