Hi,
I have a problem, with my Tandberg (rebranded HP) LTO-5 drive.
The drive like a new (less than 6 months, lightly used), and I use only new HP
cartridges.
When I write the cartridges, I see 8-10 "0x750b miWriteFaultDSPTapeOffTrack"
and "0x0 GOOD" events EVERY 2ND warps.
"Rewritten CCQs" in "Write Error Counters" isn't 0. And I see other than 0 in
row "Offtrack count" at every 2nd warp in "Write Fault Counters".
I tested 2 another drives, with new cartridges, same result.
The write successfully, I can read back later.
I use HPE L&TT utility to make a Healt dump.
Are dozens of off track events (40-50 per full cartridge write) normal?
Can anybody check this on own drive?
(Write a cartridge any way, and before eject the cartridge make a Health Dump
wit HPE L&TT tools. And see the dump with "Everything" detail level.)
Thank you, for any help.
+----------------------------------------------------------------------
|This was sent by szolnoki AT freemail DOT hu via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|