Re: [Bacula-users] Labeling when using native virtual autochanger
2015-08-25 17:01:39
> On Aug 25, 2015, at 7:03 AM, Ana Emília M. Arruda <emiliaarruda AT gmail DOT
> com> wrote:
>
> Hello again,
>
> Have you noticed a device not found error in your bconsole messages"?
>
> *mount
> The defined Storage resources are:
> 1: CreyFile
> 2: CompaqStorageWorksTapeLibrary
> Select Storage resource (1-2): 1
> Connecting to Storage daemon CreyFile at crey.int.unixathome.org:9103 ...
> Enter autochanger drive[0]:
> Enter autochanger slot:
> 3999 Device "VirtualDisk" not found or could not be opened.
>
That is found on line 143 here:
https://gist.github.com/dlangille/ef858722b30ae182b40f#file-bacula-sd-conf-L141
Autochanger {
Name = VirtualDisk
Changer Device = /dev/null
Changer Command = /dev/null
Device = vDrive-1, vDrive-2, vDrive-3, vDrive-4, vDrive-5
}
From your other message:
*mount
The defined Storage resources are:
1: File1
2: File2
Could you post your testing configuration please? I think your configuration
differs greatly from mine.
—
Dan Langille
http://langille.org/
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|