Bacula-users

Re: [Bacula-users] Could not connect to Storage daemon

2014-10-03 10:49:42
Subject: Re: [Bacula-users] Could not connect to Storage daemon
From: Ana Emília M. Arruda <emiliaarruda AT gmail DOT com>
To: David Newman <dnewman AT networktest DOT com>
Date: Fri, 3 Oct 2014 11:47:31 -0300
Hi David,

Have you tried to schedule the job at another time? Just for checking if the problem is at the scheduled time you're trying to run the job or not.

Regards,
Ana

On Fri, Oct 3, 2014 at 11:07 AM, David Newman <dnewman AT networktest DOT com> wrote:
On 10/2/14, 8:03 PM, Ana Emília M. Arruda wrote:

> Hi David,
>
> Have you checked about scheduled events that could be leading your
> bacula-sd host unavailable at that time? Some kind of outage?

Hi Ana,

As far as I know there's no other service doing anything with bacula-sd.
The same setup worked for years with FreeBSD 8.x and 9.x; the only
difference is that it doesn't work with FreeBSD 10.x.

Puzzling that manual backups work, but automated ones don't.

dn


>
> Regards,
> Ana
>
> On Thu, Oct 2, 2014 at 2:01 PM, David Newman <dnewman AT networktest DOT com
> <mailto:dnewman AT networktest DOT com>> wrote:
>
>     Bacula 5.2.12 installed as a pkg on FreeBSD 10.0-RELEASE-p9
>
>     Nightly backups fail with "Connection refused" errors like those pasted
>     below.
>
>     However:
>
>     - backups succeed when run manually from bconsole; and
>
>     - the Bacula server can telnet to the backups.networktest.com
>     <http://backups.networktest.com> address on
>     port 9103.
>
>     I've also pasted the Schedule sections from bacula-dir.conf.
>
>     Thanks in advance for troubleshooting clues.
>
>     dn
>
>
>
>     02-Oct 00:35 nye-dir JobId 20983: Start Backup JobId 20983,
>     Job=ca.2014-10-01_23.05.00_04
>     02-Oct 00:35 nye-dir JobId 20983: Warning: bsock.c:132 Could not connect
>     to Storage daemon on backups.networktest.com:9103
>     <http://backups.networktest.com:9103>. ERR=Connection refused
>     Retrying ...
>     02-Oct 00:40 nye-dir JobId 20983: Warning: bsock.c:132 Could not connect
>     to Storage daemon on backups.networktest.com:9103
>     <http://backups.networktest.com:9103>. ERR=Connection refused
>     Retrying ...
>     02-Oct 00:45 nye-dir JobId 20983: Warning: bsock.c:132 Could not connect
>     to Storage daemon on backups.networktest.com:9103
>     <http://backups.networktest.com:9103>. ERR=Connection refused
>     Retrying ...
>     02-Oct 00:50 nye-dir JobId 20983: Warning: bsock.c:132 Could not connect
>     to Storage daemon on backups.networktest.com:9103
>     <http://backups.networktest.com:9103>. ERR=Connection refused
>     Retrying ...
>     02-Oct 00:56 nye-dir JobId 20983: Warning: bsock.c:132 Could not connect
>     to Storage daemon on backups.networktest.com:9103
>     <http://backups.networktest.com:9103>. ERR=Connection refused
>     Retrying ...
>     02-Oct 01:01 nye-dir JobId 20983: Warning: bsock.c:132 Could not connect
>     to Storage daemon on backups.networktest.com:9103
>     <http://backups.networktest.com:9103>. ERR=Connection refused
>     Retrying ...
>     02-Oct 01:05 nye-dir JobId 20983: Fatal error: bsock.c:138 Unable to
>     connect to Storage daemon on backups.networktest.com:9103
>     <http://backups.networktest.com:9103>.
>     ERR=Connection refused
>
>
>
>     # List of files to be backed up
>     # When to do the backups, full backup on first sunday of the month,
>     #  differential (i.e. incremental since full) every other sunday,
>     #  and incremental backups other days
>     Schedule {
>       Name = "WeeklyCycle"
>       Run = Full 1st sun at 23:05
>       Run = Differential 2nd-5th sun at 23:05
>       Run = Incremental mon-sat at 23:05
>     }
>
>     # This schedule does the catalog. It starts after the WeeklyCycle
>     Schedule {
>       Name = "WeeklyCycleAfterBackup"
>       Run = Full sun-sat at 23:55
>     }
>
>
>     ------------------------------------------------------------------------------
>     Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
>     Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
>     Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
>     Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
>     http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
>     _______________________________________________
>     Bacula-users mailing list
>     Bacula-users AT lists.sourceforge DOT net
>     <mailto:Bacula-users AT lists.sourceforge DOT net>
>     https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>

------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users

------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users