Re: [Bacula-users] director can't connect to windows client
2014-08-12 07:32:32
I did a double check and deactivated anything I could find.
...and yes, it works now.
I didn't expect the connection between my client and the virtual
machine to be treated as a public network, so I had the firewall
inactive for private networks only. My mistake.
Thanks for getting me on the right track!
I'm assuming I won't need FDAdress for now then.
Regards,
Florian
Am 12.08.2014 um 13:24 schrieb Marius
Masalas:
Well, port is open, you can ping remote machine, but you
cannot telnet to that port. It still sounds very much like
some kind of firewall issue. You said firewall was inactive,
but it never hurts to double check. Can you check windows
firewall *.log files in C:\Windows\System32\LogFiles\Firewall
and see if there are any entries about denied requests to port
9102?
Not sure what's wrong with FDAddress keyword. I have it
some of my config (FD) files and bacula doesn't complain.
Regards,
Marius
|
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|