[Bacula-users] wake on lan in RunBeforeJob

Subject:	[Bacula-users] wake on lan in RunBeforeJob
From:	Wolfgang Routschka <wolfgang.routschka AT drumedar DOT de>
To:	"bacula-users AT lists.sourceforge DOT net" <bacula-users AT lists.sourceforge DOT net>
Date:	Fri, 28 Jun 2013 19:35:26 +0000

Hi,

one question about starting a client for backup with bacula software and wake-on-lan.

I have configure a bacula job for backup my windows client at night. To start my client I want to use wake on lan and I use the RunBeforeJob-option.

Now the problem is bacula only start the option if the bacula-daemon is able to connect the client.

Fatal error: bsock.c:138 Unable to connect to Client: win8 on x.x.x.x:9102. ERR=No route to host

Is it possbile to start the RunBeforeJob-Option although the client is not to connected?

After Running this job I can connect to the Client.

Greetings Wolfgang

------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:

Build for Windows Store.

http://p.sf.net/sfu/windows-dev2dev

_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users

<Prev in Thread]	Current Thread	[Next in Thread>
[Bacula-users] wake on lan in RunBeforeJob, Wolfgang Routschka <= Re: [Bacula-users] wake on lan in RunBeforeJob, Bill Arlofski Re: [Bacula-users] wake on lan in RunBeforeJob, Gary Dale Re: [Bacula-users] wake on lan in RunBeforeJob, Andrea Conti