On 5/4/2013 5:35 PM, Radosław Korzeniewski wrote:

> What should be a purpose of this behavior? I didn't get a point.
>
> If you have a single tape library then if you get full on one device
> then you get full on all devices in that library. No switching will help
> in this case.

Google for 'tape library' and see how many *drives* they support (not to 
be confused with how many tapes you can load into the *magazine*).

You can have more than one device in the same tape library. Which means 
no, you can get full on one device but not all devices in that library.

Dima



------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite
It's a free troubleshooting tool designed for production
Get down to code-level detail for bottlenecks, with <2% overhead.
Download for free and get started troubleshooting in minutes.
http://p.sf.net/sfu/appdyn_d2d_ap2
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users