On Sat, Feb 9, 2013 at 10:50 AM, "Jürgen Ecker" <trexman AT gmx DOT de> wrote:
> Hi,
>
> thanks for help! See below.
>
> -------- Original-Nachricht --------
>> Datum: Sat, 9 Feb 2013 14:52:40 +0100
>> Von: "Radosław Korzeniewski" <radoslaw AT korzeniewski DOT net>
>> An: "Jürgen Ecker" <trexman AT gmx DOT de>
>> CC: bacula-users <bacula-users AT lists.sourceforge DOT net>
>> Betreff: Re: [Bacula-users] Autochanger Tandberg
>
>> Hello,
>>
>> 2013/2/8 "Jürgen Ecker" <trexman AT gmx DOT de>
>>
>> > Hi,
>> >
>> > i have another problem with our tape library. The problem is that i get
>> > the following error.
>> >
>> > 94 Full Tape.2013-02-08_16.37.17_03 is waiting for an appendable
>> Volume
>> >
>> >
>> Your Bacula do not have a ready volume in required pool. Show us an output
>> of the command:
>> * list media pool=Tape
>>
>>
>>
>
> Here the output:
>
> *list media pool=Tape
> Automatically selected Catalog: MyCatalog
> Using Catalog "MyCatalog"
> +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+-------------+
> | mediaid | volumename | volstatus | enabled | volbytes | volfiles |
> volretention | recycle | slot | inchanger | mediatype | lastwritten |
> +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+-------------+
> | 183 | AAC720 | Append | 1 | 64,512 | 0 |
> 2,419,200 | 1 | 1 | 1 | LT0-4 | |
> | 184 | AAC721 | Append | 1 | 64,512 | 0 |
> 2,419,200 | 1 | 2 | 1 | LT0-4 | |
> | 185 | AAC731 | Append | 1 | 64,512 | 0 |
> 2,419,200 | 1 | 3 | 1 | LT0-4 | |
> | 186 | AAC723 | Append | 1 | 64,512 | 0 |
> 2,419,200 | 1 | 4 | 1 | LT0-4 | |
> | 187 | AAC724 | Append | 1 | 64,512 | 0 |
> 2,419,200 | 1 | 5 | 1 | LT0-4 | |
> | 188 | AAC728 | Append | 1 | 64,512 | 0 |
> 2,419,200 | 1 | 9 | 1 | LT0-4 | |
> | 189 | AAC729 | Append | 1 | 64,512 | 0 |
> 2,419,200 | 1 | 10 | 1 | LT0-4 | |
> | 190 | AAC732 | Append | 1 | 64,512 | 0 |
> 2,419,200 | 1 | 13 | 1 | LT0-4 | |
> | 191 | AAC733 | Append | 1 | 64,512 | 0 |
> 2,419,200 | 1 | 14 | 1 | LT0-4 | |
> | 192 | AAC734 | Append | 1 | 64,512 | 0 |
> 2,419,200 | 1 | 15 | 1 | LT0-4 | |
> | 193 | AAC735 | Append | 1 | 64,512 | 0 |
> 2,419,200 | 1 | 16 | 1 | LT0-4 | |
> | 194 | AAC736 | Append | 1 | 64,512 | 0 |
> 2,419,200 | 1 | 17 | 1 | LT0-4 | |
> | 195 | AAC737 | Append | 1 | 64,512 | 0 |
> 2,419,200 | 1 | 18 | 1 | LT0-4 | |
> | 196 | AAC738 | Append | 1 | 64,512 | 0 |
> 2,419,200 | 1 | 6 | 1 | LT0-4 | |
> +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+-------------+
>
>> > If i check the storage with stat->2: Storage->Autochanger it shows me
>> the
>> > following information:
>> >
>> > Device "LTO-4" (/dev/nst0) is mounted with:
>> > Volume: AAC720
>> > Pool: Tape
>> > Media type: LT0
>> > Device is BLOCKED waiting to create a volume for:
>> > Pool: Tape
>> > Media type: LT0
>> > Slot 1 is loaded in drive 0.
>> > Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
>> > Positioned at File=0 Block=0
>> > ====
>> >
Look at the media. They are all of type LT0-4 not LTO. So there is no
most likely no volume available. To fix make the volumes of type LT0.
In bconsole
update pool from resource
then
update all volumes in pool
and follow the prompts.
If you get any problem check the manual since I am going from memory here..
John
------------------------------------------------------------------------------
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013
and get the hardware for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
